Item
Description

 Estimate 
 USD 

Flown Insulation from Shuttle Wing Large piece (25.5x6x18") of insulation recovered from the wing of a Shuttle. Covered in textured metal, and...

500
-
750

Shuttle Keel Strut MLI Blanket (14.5x20") A Shuttle keel strut blanket, complete with NASA flight "Part I.D./Turn In" tag dated 10/31/95 and n...

250
-
350

Power Meter (8.25 x 11.25 x 7.25") Sticker on top reads: "Lockheed NAS 10-10900". NASA sticker on front reads: "Not In Use NASA KSC Metrology...

100
-
150

Shuttle SRB Pilot Line Parachute This (3' diameter) ribbon parachute is deployed once the free-falling Solid Rocket Booster (SRB) reaches an a...

150
-
250

Shuttle Control Panel Piece (11.5x8.5") A portion of Shuttle control panel complete with its 7 screws. Identification numbers on the back rea...

100
-
150

Shuttle Interior Water Flow Meter Model number 5510/102404. This unit, composed of a tube and sliding rod, measures the number of gallons of w...

100
-
150

Shuttle Vertical Stabilizer Wind Tunnel Model (27.5x2x27") A solid wood 1:10 scale model of the Shuttle vertical stabilizer. Beautifully craft...

2,000
-
2,500

Shuttle Era Right-Handed Glove Assembly A right-handed Shuttle era space suit glove. Glove Assembly Part number: "0106-10006-40; serial number...

500
-
750

Shuttle Era Left-Handed Glove Assembly A left-handed Shuttle era space suit glove. Glove Assembly Part number: "0106-10006-61; serial number: ...

500
-
750

NASA Flight Suit A green flight suit with a NASA meatball patch and a strip of Velcro for the wearer's name. The inside tag reads "Coveralls, ...

150
-
250

Shuttle Challenger Fit Check Tile (6 x 8 x1") These tiles were used to fit-check the shape and size of the thermal protection tiles to be inst...

150
-
250

Shuttle Challenger Fit Check Tile (6.5 x 6 x1.75") These tiles were used to fit-check the shape and size of the thermal protection tiles to be...

150
-
250

Large Prototype "Fit Check" Shuttle Tile A curved piece of tile (8.5x2.75x5.75") used to check the fit for final tiles installed on the Shutt...

100
-
150

Protective Cover Crew Module-Interior Flight Deck (20.5 x 33.5") Used to protect the interior of the Shuttle from UV damage while on the grou...

250
-
500

Tool Kit Pouch (25x12.5") A fold-out plastic pouch used to store tools. When unfolded, the pouch has ten pockets sealed with Velcro, some of w...

250
-
350

Kennedy Space Center Saturn IVB "APS Chamber Pressure" Panel (19x5.25x18") A KSC instrument panel used to monitor the pressure in the Auxiliar...

750
-
1,000

Kennedy Space Center "3B2" Time Base Panel A piece (15x4x6") of monitoring equipment used at Kennedy Space Center, this "3B2 Time Base" panel ...

150
-
250

Space Shuttle Cockpit Replica & Movie Set This highly detailed replica of the Shuttle cockpit was built by a multi-award winning Hollywood spe...

250,000
-
350,000

Space Shuttle Mid Deck Level Replica The Space Shuttle cockpit rests on top of this mid deck level to finish off the interior nose of the Shut...

150,000
-
250,000

Space Shuttle Cockpit Stretch Section Replica This authentic looking replica was built originally for the movie "Space Cowboys" by a multi-awa...

25,000
-
50,000