Carved ship's half model

Nineteenth century Clipper Ship Half Model with carved hull, three masts, carved figurehead, and capstan. Mounted to a wood backboard. Brass hanging tabs. Weight is 6 pounds.35" x 10" x 3"

Antique half ship model diorama, carved and painted wood and string, unsigned, 14-3/4" x 25-3/4" x 2-1/2", good condition

Antique half ship model diorama, carved and painted wood and string, unsigned, 18" x 28-3/4" x 2-3/4", good condition, one loose piece

Antique half ship model diorama, carved and painted wood and string, unsigned, 13-3/4" x 23-1/2" x 2-3/8", good condition, 2 small loose pieces

A Carved Wooden Half Hull Model Ship. Half Hulls are exact models of ships hulls, without the mast and rigging, that were used by shipwrights to plan the design of the ship and make sure everything wa

Cythera, Gloucester: Half Hull Ship Model. Carved and painted wood ship on wood backing. Unknown artist. 9 L x 38 H x 4 W inches

19th century schooner hull, mounted on back board. 12 1/4" high, 63 1/2" wide, 6" deep. Soiling, age and storage related wear, old crusty original finish. Property of a CT collector.

Fine old carved and painted wood half-hull ship model of the Steel Barque Silverstream built 1891 by C. Bigger of Londonderry. Size: 68 in long x 14 h x 5 deep. Sunk by German U-boat on Sept. 4, 1916

Vintage Ralph Lauren Wood Carved Half Hull Sailing Ship Model in Shadowbox Frame. Original Ralph Lauren price label affixed en verso. Good condition. Measures 25" H x 31-1/2" W. Shipping: Third party

Carved half hull model of ship, approx 13"h, 30"w, 7lbs Start Price: $100.00

Ship's Hull Wood, carved and painted With old label on verso, "Carving by J. O. J. Frost 1857-1928 (Half Model) / Gift of Mr and Mrs. Richard Mason, Marblehead Mass." h. 6-1/2 w. 29 d. 3-1/2 in. Prove

20th century. The hull carved from a solid pine laminated board. The hull painted green above the water line with natural finish below. The rudder applied to the hull. The green backboard with the nam

(lot of 3) American Primitive half hull wood carved wall ship's models circa 1870, largest 10"h x 37"w. Provenance: Property from the estate of Thomas J. Perkins, San Francisco, and Belvedere, CA

Folk Art Clipper Ship "N. Light" Shadow Box, early 20th Century, depicting a carved half model of the fully rigged 3-mast ship "N. Light", with 29 carved wood sails, in molded cherry frame. Overall He

Large vintage carved and painted wood half-hull model of the CAMBRIAN built by Green and Lowden of London in 1854. 57 in long x 13.5 x 3.5 in deep.

MOUNTED HALF HULL MODEL OF THE CLIPPER SHIP "FLYING CLOUD"20th CenturyModel with black painted hull, a red bottom, and a carved figurehead and trailboard. Vessel identification painted on ba

Large old carved wood half hull model NO. 221 CABLE SHIP. 5 ft. long (60 in.) by 10.5 in high.

Vintage Hand Painted Plank on Frame Half Hull Builders Model of the Iron Ship "Centaur", built in Portsmouth in 1865, carved and painted hull mounted on painted backboard. Length 44 in. Height 10 in.

Mahogany. Half hull. Painted. Backboard also mahogany. 6 3/8 x 23 3/4

EARLY HAND CARVED SHIP MODEL OLD PAINT, 32" LONG, UNTOUCHED CONDITION, WITH THREE REMOVABLE TALL MASTS, SOLID

Finely carved half model of a catboat. The model has a carved wood hull in alternating woods. It is identified as a 21 foot Cape Cod catboat named Dolphin with a makers label from CH Seigerland in Lin

United States,1890s- 1910 A wood carved and hollow hull with nicely carved main guns. Props are to scale and were made to rotate with a clock work mechanism but that is long gone. Partial remains of t

Painted half hull model of the yacht, "The Sheldrake". Lifts evident under paint. Designer: Winthrop L. Warner. Builder: Paul E. Luke. 1949. (Identified on engraved plaque). 12 x 36 3/4 inches (backbo

Man-O'-War Sailing Dinghy by Joe Albury, 43" x 10.5" x 8"