Eames DCM chair 2

Charles and Ray Eames side / dining chair in walnut 29" H x 20" D x 19" W.

PAIR OF EAMES FOR HERMAN MILLER DCM SIDE CHAIRS. 19 1/2" W x 21" D x 29 1/2" H. THIS ITEM EXCEEDS SIZE LIMITATIONS FOR IN HOUSE SHIPPING.

Charles Eames (1907-1978) & Ray Eames (1912-1988) DCM chair Zeeland, Michigan, 1977 walnut plywood, chromed steel, rubber, nylon labeled and dated 19 1/2"w x 21"d x 30"h

A Charles and Ray Eames DCM bent plywood chair. Manufactured by Evan Products Company Molded Plywood Division and distributed by Herman Miller. With label on back. 29 1/2"h x 19 1/8"w x 20 1/2"d. Cond

They are in overall very good condition. There is some veneer loss to the front edge of two seats (See Photos). There are three missing rubber feet. They measure 19 1/2" wide, 21" deep, and 29" tall.

Pair of Charles Eames DCM chairs for Herman Miller. Some replacements, each missing one foot pad. 30''h, 19-1/2''w, 21''d.

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller DCM dining chairs, pair Zeeland, Michigan, 1950s ash, steel disc tag to one 19 3/4"w x 22"d x 29 1/2"h

Three Eames DCM plywood chairs with zinc-plated steel legs. Two with Herman Miller foil labels. H: 30 in. W: 19-1/2 in. D: 21 in.

Mid Century Modern Eames DCM chairs, possibly Herman Miller; No makers mark/label observed; Each chair measures approximately H 29 1/4 x W 19 1/4 x D 20 1/2 inches; Chips, scratches and staining obser

Pair early Charles and Ray Eames DCM chairs in walnut manufactured by Evans Products, 1947-1950 labels. Oval shock mounts to backs, 5 – 2 – 5 screw configuration to frames, and original Evans labe

Pair early Charles and Ray Eames DCM chairs in walnut manufactured by Evans Products, with1947-1950 labels. Oval shock mounts to backs, 5 – 2 – 5 screw configuration to frames, and original Evans

(4) items including Eames for Herman Miller 'DCM' chair having maker labels on underside; (2) (in the style of) Umbra 'Oh' chairs each having a molded plastic body on a metal frame; and a leather and

laminated, molded plywood and metal; unsigned; Condition: scratches and marks to laminate; one chair with crack to bushing and missing foot; oxidation to metal; 19 1/2 inches wide; 20 inches deep; 29

molded walnut plywood, chromed metal; unsigned 29 1/2 x 19 1/2 x 22 1/2 in. (74.9 x 49.5 x 57.2 cm.), seat height: 18 in. (45.7 cm.) Provenance: Property from the Collection of William Krisel, AIA

circa 1950s, most with ‘domes of silence’ glides, two chairs with paper labels, h. 30 w. 19-1/2 in., with bag of extra hardware

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller DCM chairs, set of four Zeeland, Michigan, 1952 birch plywood, enameled steel, rubber 'DCM' stamp to all and dates to two 19 1/2"w x

Three Charles and Ray Eames Molded Plywood and Metal DCM Chairs and an LCM Chair Height of DCM cha... Chairs and an LCM Chair Height of DCM chairs back 29 3/4 inches, width 19 1/2 inches, depth 19 1/2

molded plywood, chromed steel; each with Herman Miller paper label 29 1/2 x 20 x 20 in. (74.9 x 50.8 x 50.8 cm.), Seat height: 17 1/2 in. (44.5 cm.)

A DCM Chair by Charles and Ray Eames (American, 1907-1978; American, 1912-1988) laminated walnut and enamel over chrome-plated steel and rubber Height 29 1/2 x width 19 1/2 x depth 19 1/4 inches.

Molded plywood in a black finish on tubular chrome steel bases, including the DTM-2 folding card table, and a set of (3) side chairs. Unmarked. Surface wear including some areas of loss to the veneer,

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller DCM dining chairs, pair Zeeland, Michigan, circa 1960 birch, rubber, chrome-plated steel unmarked 19 1/2"w x 21"d x 29"h

Charles and Ray Eames (American, 1907-1978 | American, 1912-1988) Pair of DCM Dining ChairsHerman Miller, USA ash, chrome-plated steel, rubber H 30 x W 19 1/2 x D 22 inches. Property from the Phyllis

Five chairs: three DCM, one DCW, one Eiffel Tower, Zeeland, MI, 1950s; Walnut, ash plywood, reinforced fiberglass and upholstery, enameled steel; Foil labels to DCM, DCW stamped; DCW: 29" x 19 1/2" x

Set of four DCM style dining chairs, 2000s Chromed steel, enameled plywood, rubber Unmarked 29 1/2" x 19 1/2" x 22"