Mahogany Work Table

Canted corner top opens to writing surface and case fitted for the allied accoutrements. Center drawer bears makers label over a third drawer that opens to pull-out basket (now absent). Case is raised

George III Mahogany Work Table with Firescreen ca. 1800, the canted rectangular top double-banded and above a conforming frieze fitted with two end drawers and a pull-up fabric screen, raised on taper

Circa 1820 English mahogany work table with ebony inlay, single drawer, brass castors, 28 3/4" H x 18 1/4" L x 24" D. Top shows finish wear. Provenance: The Waldingfield collection of Arthur Finkelste

C. 1800 Lacking sewing basket to underside 29"h x 40-3/4"w x 17-1/2"d Provenance: Arthur Ackerman & Son, Inc., New York; Property from the Collection of Mimi Adler

American Sheraton mahogany work table, 19th c., rectangular case with three graduated drawers, two with brass pulls, raised on round reeded legs, shaped stretcher shelf, on brass casters, 29"h x 21.5"

American Federal Mahogany Work Table, c. 1810, probably Baltimore, outset corners, ring-turned stiles, two drawers, foliate-carved legs, ball feet, h. 30 3/4 in., w. 24 in., d. 20 in.

American Classical Carved, Ebonized, and Gilt-Stenciled Mahogany Work Table, c. 1830, New York, two drawers, acanthus carved support with hipped legs and hairy paw legs, h. 27 1/2 in., w. 22 in., d. 1

American Classical Carved Mahogany Work Table , early 19th c., converted hinged top now fitted as a writing desk, two lower drawers, octagonal standard, scrolled feet, casters, h. 29 1/2 in., w. 21 3/

Extraordinaire MEEKS Period Mahogany Work Table of Extra Large Size, Beautiful Design and Great Construction which adds to the Condition, which after about 200 years, is just about as perfect as the d

New York Tambour Mahogany Work Table. C. 1810. School of Duncan Phyfe. Reeded legs on turned feet with brass casters. Ht. 29" W 26 1/2" D 14". A Private Niagara-on-the Lake, Ontario, Collection.

Late 18th C., the back fitted with a silk-lined firescreen on a ratchet support 30-1/4"h x 20"w x 16-1/4"d Provenance: Property from the Collection of Mimi Adler

American Classical carved mahogany work table, 19th c., figured and ebonized mahogany, brass pulls, the rectangular case with two drawers set with lion mask pulls, on a foliate carved baluster pedesta

American Federal Mahogany Work Table, early 19th c., Massachusetts, top with outset corners, conforming case with ring-turned stiles, two beaded drawers, tapered reeded legs, casters, h. 29 1/4 in., w

Winterthur Collection by Kindel, one drawer, stamped 25"h x 20-3/4"w x 21-3/4"d

American Classical Carved Mahogany Work Table, early 19th c., foliate-carved paneled stiles, turned and foliate-carved legs, h. 31 in., w. 25 in., d. 17 in. Sold to Benefit the Angelina and Michael Bl

two drawers, drop leaves, carved post with in-curving reeded legs, brass paw feet on casters, 28.5"h; 17"w with 8.5"leaves; 19.5"d

Portsmouth, New Hampshire Mahogany and Mahogany Veneered Work Table, Circa 1825. The rectangular top with rounded outset corners above two line-inlaid cockbeaded drawers, raised on slender ring-turned

with four serpentine sides, case with two working drawers and a side opening bag drawer, leaf carved turned and reeded legs with casters. 28 3/4" high, 19 3/4" wide, 17 1/4" deep. Age and use wear, cr

A Regency mahogany work table, the rounded rectangular top with a molded edge above a shallow and a deep drawer with opposing false drawers, all with turned knob handles, on ring-turned tapering legs

American Carved Mahogany Work Table, late 19th c., the rectangular top over a compartmented upper drawer above a lower drawer, both with brass pulls, on ring turned tapered legs on brass cap casters,

George III figured mahogany work table, 19th c., possibly American, hinged oval top, inlaid stringing, green velvet interior, 26"h x 20.75"w x 14.25"d

20th century; in the North Shore, Massachusetts manor, four turreted corners, elaborately carved reeded legs and two drawers, 30 in. H., 19 in. W., 16 in. D.

A Classical Mahogany Work Table Circa 1840 Height 28 3/4 x width 20 1/2 x depth 19 1/4 inches (closed).

American Federal Carved Mahogany Work Table, 19th c., the gadrooned carved edge rectangular top above two setback drawers, on a turned and urn carved pedestal to a quadruped base on elongated paw feet