Plank, Ernst rare clock mechanism steam engine with

Märklin track 1, clock mechanism steam engine, 2B, extra train is new, colorwise over painted, tender 2-axled, 2588, function wasn't checked German Description MÄRKLIN Spur 1, Uhrwerk-Dampflok, 2B,

Märklin clock mechanism steam engine, 1041, partially colorwise touched up, funnel and roof were new over painted, dome new, B-axle, 2-axled tender German Description MÄRKLIN Uhrwerk-Dampflok, 1041,

Märklin track 0, clock mechanism steam engine, 2B, with 3-axled tender, was partially colorwise retouched, E1050, clock mechanism is intact German Description MÄRKLIN Spur 0, Uhrwerk-Dampflok, 2B, m

Märklin track 0, clock mechanism steam engine, 2B, extra train, reproduction, tender, axles new, was colorwise over painted, function wasn't checked German Description MÄRKLIN Spur 0, Uhrwerk-Dampfl

Märklin track 0, clock mechanism steam engine, 981, green, was partially colorwise retouched, with slight scratches on the paintwork, 2-axled tender, B German Description MÄRKLIN Spur 0, Uhrwerk-Dam

Märklin track 1, clock mechanism steam engine, 981, B, green/black, with 2-axled tender, was colorwise retouched, 981, function wasn't checked German Description MÄRKLIN Spur 1, Uhrwerk-Dampflok, 98

Märklin track 0, clock mechanism steam engine, R1050, green/black, B, 2-axled tender, was partially colorwise retouched, function wasn't checked German Description MÄRKLIN Spur 0, Uhrwerk-Dampflok,

Ernst Plank steam engine with separate four-wheel transmission, both retaining original maker's plate and are mounted on wood bases, engine outfitted with a governor, 10'' h., 7'' w.

ERNST PLANK steam engine with ferris wheel, around 1900, drive model, mounted on a wooden board, board 39 x 14 cm, used, scratches on the paintwork, without burner German Description ERNST PLANK Dampf

steam powered flywheel with governor on wood base in original box with colorful paper label; housing retains makers' brass plaque engine on base 5.25" w. x 8.5" t. x 5" d.

Has good color, shows wear and paint loss throughout, dual chamber, top pipe has been resoldered, displays well, marked D.R.G.M. 193033, 14x9.75x10.75", rated 7.75

Ernst Plank Cosmos steam engine, in its original box, 13'' h., 4 1/2'' w.

Circa 1910 Ernst Plank Vertical Steam Engine. All original with EP nameplate. Comes with Wilesco Machine Shop Accessory that has hammer, grinder, and saw. Steam Engine measures 11" Tall. Very Good-Exc

All original. Wheel has breaks. 14" Very Good

Very hard to find early 20th century Ernst Plank electric steam engine. All tin construction with 7" by 7" base. 11" tall to top of chimney. Has general wear, and some dings to boiler. Includes origin

4 Toy Steam Engines 1) Ernst Plank, horizontal steam engine with dynamo, boiler heavily modified, with additional manual feed pump, converted to gas heating, without chimney, dimensions of the basepla

276. ERNST PLANK PUPPET VALVE STEAM ENGINE | Circa 1895. | 13" h. x 12" l. | Stack and tin base holding flywheel is repainted, otherwise in All Original Condition. | $300 - $600

ERNST PLANK Torpedo boat, clock mechanism drive, handpaintedsheet metal, 40 cm, mast, 2 funnels, 2 artillery, partially colorwise a little bit retouched, clock mechanism is intact German Description E

Vintage Ernst Plank toy stationary steam engine, Hercules. Manufactured by Ernst Plank Co of Nuremburg Germany in the early 20th century. Small metal plates read, E.P and Hercules. Pressed metal toy o

ERNST PLANK EXCELSIOR, standing steam engine, 35 cm, base casting, handpainted, brass boiler, burnished, with feed pump, burner, manometer, glass is cracked, water level glass, whistle, funnel, optica

C. 1902 Scale Model of Steam Engine by Ernst Plank of Nuremberg. 4.5"W x 6"Deep x 13"H

Including; Weeden 110 volts upright steam engine and ERNST PLANK "Noris" 1903 standing steam engine. Measuring approx. 11 1/4" to 13 1/2" tall. In age appropriate condition, see photos.

Including; Weeden 110 volts upright steam engine and ERNST PLANK "Noris" 1903 standing steam engine. Measuring approx. 11 1/4" to 13 1/2" tall. In age appropriate condition, see photos.

1041. ERNST PLANK HERCULES STEAM PLANT | Desirable engine, small scale. | 12" h. | (Excellent to Pristine Condition) | $600 - $900