Stationary Steam Traction Engine by G. Carette (69

123 stationary, 8 in tall, missing smoke stack, 645 traction engine, 7 in long, front wheels replaced, C5-6.

American. 1900s. Cast iron, brass, copper. Used as a salesman sample. Maker unknown. 8.5" x 10" x 6".

Large Stationary Steam Engine by Doll, c. 1935 Nuremberg, no. 520/4, fixed cylinder, length of the boiler 12 ¼ in., Ø 4 in., boiler support, 2 boiler galleries with stairs and railings, two

Model of a British Single-Cylinder Live Steam Traction Engine with Rope Winch, c. 1970 Working model of a Ruston, Proctor and Company machine from c. 1900, with cast-iron body, coal-fired boiler, sing

A MODEL VERTICAL OVERHEAD CRANK STATIONARY STEAM ENGINE, 20TH CENTURY, the heavily cast and machined 6-spoke flywheel fitted to one end of the overhead crankshaft, supported by a pierced cast plate an

Steam Traction Engine Model Large scale steam traction engine c.1920s. Engine is 11 inches long and 12 inches tall. Well made engineer made piece with original paint.

Large stationary steam engine model hand built and mounted into a wood box display. Apparently unmarked. Approximate height 9.5", width 15.6", depth 9".

Stationary Steam Engine by Doll, c. 1927 Nuremberg, no. 510/3, fixed cylinder, length of the boiler 11 in., Ø 3 1/2 in., 2 boiler galleries with railings, with water level gauge, safety valve, st

Marklin Brass Live Steam Traction Engine. All brass boiler on this impressive German steam tractor.

Has a great look, cylinder is free and wheel spins freely, has oiler, shows some wear and paint loss, displays well, not marked, mounted on a slab of wood, heavy, 17.75"x25", rated 8

261. MARKLIN LIVE STEAM TRACTION ENGINE | 10.5" l. | Partial restoration to painted areas w/replaced smoke stack, (Excellent Condition) | $700 - $1,400

FALK stationary traction engine, c. 1915, surface area 30 x 16.5 cm, surface area was a bit retouched, boiler, diameter: 11.5 cm, flywheel, diameter: 15 cm, water level glass, regulator of centrifugal

Earl example with fancy tile floor mounted to 16.5 X 7.5” wood base. Includes burner, dynamo with switch & night. Base shows some staining in center, otherwise presents well. Very Good.

This is a very cool rarer c1935 Marklin stationary steam engine. It is model 4097/6 and appears complete and original WITH ORIGINAL BURNER AND FUNNEL. 15" tall x 12" x 12". Tried to test it and it's m

FALK stationary traction engine, surface area, 26 x 15 cm, was colorwise retouched, boiler, diameter: 10.3 cm, water level glass, pipe, regulator of centrifugal force, feed pump, with burner, 2 stair

Nice early example dampfmaschine with tin tile floor mounted on 11 X 9.5” wood base. It includes its burner and scarce filler cup, just missing the streetlamp whistle. It would benefit from a cleani

Unusual form on embossed litho support mounted to cast iron base, 9 X 5.5:. Shine brass boiler with burner and screened stash. This will polish nicely. Excellent.

Doll et Cie German Toy Steam Engine. Worn from use. Dusty. Missing stack.

A Bing Steam Traction Engine Toy Bing Works, Nuremberg, Germany, Early 20th Century Height 9 1/2 x width 7 1/2 inches.

Vintage Wilesco Old Smoky D40 " DAMPFTRAKTOR" Traction Steam Engine Tractor.Tractor is in great looks like unused condition.Not tested for working condition.Model is 12".

probably BING stationary traction engine, 24.5 cm, water level glass, whistle, regulator of centrifugal force, oscillating cylinder, with burner, base plate was over painted, used German Description w

DOLL stationary traction engine, sheet metal, handpainted base plate, 27 cm, water level glass, whistle, regulator of centrifugal force, funnel, boiler, polished brass, without burner, used German Des

DOLL stationary traction engine, surface area 31x16 cm, boiler diameter: 7 cm, burnished boiler, water level glass, regulator of centrifugal force, pipe, manometer with burner, base plate rust, with s

Large Live Steam Traction Engine "Old Smoky" Wilesco. Large size well made engine.