Two, Desco Diving Belts with Lead Weights

Lot features one commercial hard hat style weight belt, a yellow scuba diver style belt and two curved style spare lead weights. Please refer to photos for condition details. All items will be shipped

This is a very old divers weight belt with a total of eight lead weights. The belt itself is very heavy leather with brass hardware. The leather is in well used condition, brass buckles are in good co

Grouping of brass weight belt hardware along with twelve bolt drive dress collar. The brass hardware is for securing lead weight to the leather belt. There are 8 brass plates, two of which are stamped

This lot consists of a nicely detailed US Navy Mark V diving helmet plaque and two Schrader hard chalk replicas of a weight belt ingots. The helmet plaque measures 6.5 inches tall and 4.25 inches wide

Two Vintage Canvas Wrapped Goose Decoysincluding a canvas over wire decoy with painted wood head and lead weight (25 in.); and a diving goose (11 in.), unmarked. From the Battle Family, Rocky Mount, N

This is a grouping of vintage scuba diving equipment, all in used condition. The gear includes a homemade weight belt with four lead ingots with brass buckle and fancy knots attached, a NCG gas regula

This is a pair of A.J. Morse divers lead chest weights. These were used by commercial divers rather than the weight belt. Both have the Morse name. One is missing the top two brass rings. We are unsur

TWO LEAD FISH WEIGHTSEarly 19th Century Weight approx. 6.75 pounds.

These are the front and back lead weights for an AJ Morse or Morse Diving Equipment Model 15 shallow water diving helmet. These weights are contemporary. The pair weigh 34 pounds in total. Unused in l

Newly cast pair of front and back lead weights for the Morse model 15 shallow water diving helmet. These weights are the correct size, weight and do have Front and Back clearly part of their design, j

7th century AD. Two lead disc weights comprising: one thin (about 3mm) with the impression of an inset sceatta coin of Abramson's triquetra type with looped triquetra and rosettes within a pelletted b

This is a well-used vintage weight belt. Leather belt, 9 lead weights and rope make up this piece of equipment. Likely used by commercial diver and probably not comfortable with the rope for shoulder

Lot of 3 Black Duck decoys: one cork, two balsa. One branded "Wildfowler", another branded "D.A.S.". Others possibly made by Wildfowler. Two with lead weight attached. Provenance: From Wildfowler Deco

Heavy 50-pound weight belt with 11 separate lead ingots. Belt itself is heavy old leather in well-worn condition. Please refer to photos for condition details. All items will be shipped with a signatu

This is a mold to make lead diving weights. This pattern is referred to as a horseshoe or chest weight. They were strapped to the diver via the helmet on the chest and back. This model, specifically,

120. SIX EARLY COUNTERWEIGHT CANDLE HOLDERS | Four with reflective lead weights, two with tin floral weights. | 5" h. | Some tarnishing, (Very Good Condition) | $150 - $300

Vintage divers weight belt in used condition. Belt has six lead weights attached and one loose with brass loop and leather strap attached. The leather surface is flaking due to age and use. Lead ingot

Lot consists of one as new DESCO produced belt buckle and one brass pin. Both feature the US Navy Mark V diving helmet. The belt buckle is clearly marked on the back with DESCO information and the yea

Used original leather divers weight belt. This example was used for display purposes which is why painted wood blocks are in place of the lead weights. The belt has 10 wood block weights install. Belt

New Jersey Bluebill Drake Attributed to Henry Kilpatrick, Barnegat, NJ A 13 ¾ inch decoy with painted eyes, a square lead weight and two partial William J. Mackey, Jr. (1902-1972) Collection stam

Nineteenth century. Hand made wooden bootjacks. One with lead weight and two glass knobs on the bottom. Partial scratch carved name. Worn with traces of blue paint. 10.5"l. And one with square nails a

Metal rivet punch, 14" wooden boat shuttle, 8" darning implement, lead weight and two yarn spools.

Both have glass eyes. One's head is broken at neck and loose. Significant shrinkage cracks to wood and heavy wear to original paint. Largest 16" L.

This is a wonderful pair of never used like new divers boots. These boots were made by Diving Equipment and Supply Company. They are the US Navy heavy weight model. These feature a brass toe stamped w