Original laminated builder’s half model

Laminated pine mounted to mahogany which measures keel length. 34 1/2 x 10 1/2 x 6 inches.

Original shipyard builders half model of an American tugboat with varnished finish. Mounted to a wood backboard. The successful bidder will have the option of removing this item from the auction site

Circa 1890 carved and painted wood half hull model (laminated) with original surface. Small piece of wood backboard missing on end. Overall 43 in long x 9 x 5 d. Possibly a Fall River Steam passenger

Builders model of a Crosby Catboat. Laminated Pine half model. Nice shape, back is marked M. Crosby. The Crosby Family of Osterville Massachusetts are famous builders of catboats and other craft. 4x6x

Fine antique laminated half model of a sailing sloop with five lifts, cockpit at stern, stubbed mast, rudder, etc. Fine patina, mounted to original backboard

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

MOUNTED BUILDER’S PRESENTATION HALF HULL MODEL OF A CATBOAT20th CenturyUnder original paint, including a red “10” on the sail. Wooden backboard painted blue.Backboard 15” x 11”.

Extremely rare shipyard builders half model of the United States Lighthouse Service Lighthouse Tender Juniper. Launched in 1939 just before the USLHS became The United States Coast Guard. The Juniper

EXTREMELY rare shipyard builders half model of the United States Lighthouse Service lighthouse tender JASMINE. Jasmine was built by the Dravo Contracting Company in Pittsburgh Pennsylvania in 1935. Th

Builders half model of a lobster boat. The hull is built of eight lifts and is mounted to a backboard.

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b

MOUNTED BUILDER'S HALF HULL MODEL19th CenturyHardwood model built up in fourteen lifts.Pine backboard 11.5" x 56.25".

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

MOUNTED BUILDER'S HALF HULL MODEL OF THE COASTAL SCHOONER "MENHADEN"Late 19th CenturyHardwood model built up in seven lifts. Typewritten note verso refers to the Menhaden as being 184 feet l

BUILDER'S HALF HULL MODEL OF A STEAM-POWERED SAILING VESSELLast Half of the 19th CenturyBuilt up in nine lifts. Screw shaft molding at stern.Height 9.5". Length 50.5".Provenance:Hyde Park

MOUNTED BUILDER'S HALF HULL MODEL19th CenturyBuilt up in ten lifts.Mahogany backboard 10.25" x 53".

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and

BUILDER'S HALF HULL MODEL OF A COASTAL PACKET SHIP19th CenturyBuilt up in eight lifts. Stained a mahogany color. Height 9”. Length 57”. Depth 6.75”.

MOUNTED BUILDER'S HALF HULL MODEL OF A LOBSTER BOATEarly 20th CenturyHull built up in six lifts. White wash topsides and rust bottom.Walnut backboard 9" x 28".

MOUNTED BUILDER'S HALF HULL MODEL OF A SHOAL DRAFT SLOOPAmerica, Late 19th CenturyHull built up in eleven lifts of alternating yellow pine and mahogany. Mounted on a later white-painted backboard.Back

MOUNTED BUILDER'S HALF HULL MODELLate 19th CenturyPine model built up in four lifts. Several builder's scribe marks. Inscribed verso "From Sommers Point New Jersey". Back of backboard painte

MOUNTED BUILDER'S HALF HULL MODEL OF A SAILING YACHT Late 19th/Early 20th Century Built up in four lifts. Backboard 4.75" x 23.75".

MOUNTED BUILDER'S HALF HULL MODEL19th CenturyIn maple. Brown stained finish.Length 18”.