pine carved half hull model of a 19thC sailing vessel

MOUNTED HALF HULL MODEL OF A SAILING VESSELLate 19th CenturyMahogany model.Pine backboard 11.25” x 43”.

MOUNTED BUILDER’S HALF HULL MODEL OF A SAILING VESSELEarly 20th CenturyBuilt up in six lifts.Contemporary pine backboard 9” x 30”.

MOUNTED BUILDER’S HALF HULL MODEL OF THE SAILING VESSEL “LOBSTER”Late 19th/Early 20th CenturyBuilt up in five lifts. Natural hull with green bottom.Backboard 7” x 36.25”.

BUILDER’S HALF HULL MODEL OF A SAILING VESSELLate 19th/Early 20th CenturyBuilt up in seven lifts.6.25” x 43.25”.

BUILDER’S HALF HULL MODEL OF A SAILING VESSELFirst Quarter of the 20th CenturyBuilt up in seven lifts.6” x 41.5”.

MOUNTED BUILDER'S-STYLE HALF HULL MODEL OF A 19TH CENTURY SAILING VESSEL20th CenturyBuilt up in nine alternating light and dark wood lifts. Hardwood backboard.Backboard 9.5" x 46.75".

BUILDER'S HALF HULL MODEL OF A STEAM-POWERED SAILING VESSELLast Half of the 19th CenturyBuilt up in nine lifts. Screw shaft molding at stern.Height 9.5". Length 50.5".Provenance:Hyde Park

Vintage Ralph Lauren Wood Carved Half Hull Sailing Ship Model in Shadowbox Frame. Original Ralph Lauren price label affixed en verso. Good condition. Measures 25" H x 31-1/2" W. Shipping: Third party

MOUNTED HALF HULL MODEL OF A MOTOR VESSELFirst Half of the 20th CenturyBlack hull with maroon bottom.White-painted pine backboard 9.75” x 39”.

MOUNTED BUILDER’S HALF HULL MODEL OF A MOTOR VESSELFirst Half of the 20th CenturyMarkings on deck and hull, and marked on deck “Capt. H. Hinchcliffe”.Pine backboard 5” x 25&#82

FOUR BOAT HULL MODELSFirst Half of the 20th CenturyA pond model, a tug, a launch and a small sailing vessel.Lengths from 16.5” to 34.75”.

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b

20th century. The hull carved from a solid pine laminated board. The hull painted green above the water line with natural finish below. The rudder applied to the hull. The green backboard with the nam

Nautical, Half Hull Model - W.G. Teppis. - Naval Architect. - Newport ~Vessel~ No. 4...1853, carved wood with polychrome paint additions, overall: 45 1/2"w x 4"d x 10 1/8"h Provenance: Provenance: The

Rigged Half-Hull Model of a Gaff Rigged Sloop, circa 1900, carved and painted hull with cardstock sails, cotton string rigging, set into a blue painted shadowbox with walnut molded frame, 19 1/2" x 20

MOUNTED HALF HULL MODEL OF THE CLIPPER SHIP "FLYING CLOUD"20th CenturyModel with black painted hull, a red bottom, and a carved figurehead and trailboard. Vessel identification painted on ba

SHADOW BOX MODEL OF AN AMERICAN-FLAGGED SAILING SHIPLast Quarter of the 19th CenturyVessel with black hull with a white stripe showing gunports, and a beautifully carved figurehead under the bowsprit.

Laminated pine half-hull model, 19th c., mounted on a walnut backboard. 9.5"h.x38"l.x6"d.

Laminated pine half-hull model mounted on a mahogany backboard. 9"h.x32.25"l.x5.5"d.

Carved half hull model of ship, approx 13"h, 30"w, 7lbs Start Price: $100.00

Backboard 9 x 32 inches. Note on back reads " built by Herbert Simmons-Friendship, ME. Born: 10/6/1871, Died: 7/17/1940."

TWO LAMINATED PINE HALF HULL MODELSLate 19th/Early 20th CenturyUnmounted.Lengths 30" and 30.25".

Large old carved wood half hull model NO. 221 CABLE SHIP. 5 ft. long (60 in.) by 10.5 in high.

A Carved Wooden Half Hull Model Ship. Half Hulls are exact models of ships hulls, without the mast and rigging, that were used by shipwrights to plan the design of the ship and make sure everything wa