HAND MACHINED MODEL OF LARGE STEAM ENGINE

Cast iron, steel and brass model of a large single cylinder engine. Signed. Height 8 1/2 inches. Note: Arnold Edmund Thompson (1931-2010) Marblehead, MA. In the early 1950's during his USAF tour he pe

Large stationary steam engine model hand built and mounted into a wood box display. Apparently unmarked. Approximate height 9.5", width 15.6", depth 9".

Brass, copper and steel. 8 1/2 x 5 x 3 inches. Signed Arnold Thomas. Note: Arnold Edmund Thompson (1931-2010) Marblehead, MA. In the early 1950's during his USAF tour he perfected his plane models. He

Steal, copper, aluminum and wood. signed. 4 1/2 x 10 x 5 inches. Note: Arnold Edmund Thompson (1931-2010) Marblehead, MA. In the early 1950's during his USAF tour he perfected his plane models. He bec

Steam Traction Engine Model Large scale steam traction engine c.1920s. Engine is 11 inches long and 12 inches tall. Well made engineer made piece with original paint.

Model hand built steam engine with live stationary twin piston drum engine Drive belt present but needs to be replaced. 6"H x 7 3/4"W x 7 1/2"D

1900s Steam Engine Large Scale Model. A work of art, brass fittings and large flywheel steam driven steam engine on wooden dovetailed platform.Base is 18 inches wide and 23 inches tall at the chimney.

Well engineered model of an early over type vertical steam engine, first patented in 1797. They were typically used in collieries for any sort of power that was needed. Engine is mounted onto wood pla

1900s Steam Engine Large Scale Metal Model. Impressive large made to work steam engine with large flywheel and governor. Original paint, measures 23 inches wide by 15 inches tall.

Large hand-painted wooden steam engine with metal wheels, early child's toy train, folk art.Size: 12 1/2 x 4 x 7 in.

Steam Engine Large Scale Metal Model. Huge flywheel on this working model c.1900. Base is 30 inches long and 16 inches tall. Flywheel is 15 inches tall.

Large live steam engine model with two flywheels, positive and negative connectors, marked on a wood display base. Apparently unmarked. Approximate height 10", width 13", depth 6".

Vintage Stuart Turner Ltd. large walking beam model steam engine on wood base 12 1/2"H x 16"W x 8"D

Includes original boxes and outside shipping box. It is an Accucraft SP Daylight GS4 No. 4449 engine and matching No. 4449 tender. Very little wear. Toy (Excellent). Boxes (Very Good).

A STUART STEAM ENGINE MODEL , A Large GROVE MILL STEAM PLANT WITH A HORIZONTAL BOILER. A FINE Table top steam ENGINE plant. FULLY ASSEMBLED. The Base measures 15" inches wide by 19" 1/2 inches long.

Machine, steam engine accessory lot, piston drive parts, flywheel & piston, machined engine model with pistons (loose), oil lubrication machine (?) & more odds & ends

Early 1900s Large Steam Roller Model - Offered Without ReserveOffered for sale is a hand-built model of an early 20th Century Steam Road Roller. Construction is primarily of wood including the boiler,

1 ½-Inch Scale Model of a Live-Steam Traction Engine, c. 1984 Large working model of the British "Jennifer" traction engine, coal-fired, twin-cylinder engine, Stephenson’s slide-valve gear,

1-Inch Scale Model of a Live-Steam Traction Engine, c. 1980 Large working model of the British "The Minnie" traction engine, green finish, coal-fired, twin-cylinder engine, Stephenson’s slide-va

1-Inch Scale Model of a Live-Steam Traction Engine, c. 1980 Large working model of the British "The Minnie" traction engine, maroon finish, coal-fired, twin-cylinder engine, Stephenson’s slide-v

Large Working Model of a Stationary Twin-Cylinder Undertype Steam Engine, c. 1975 Extremely detailed model, brass, steel and cast-iron parts, partly finished in green, coal-fired, soldered brass flame

Great large vertical early steam engine probably made by Faulk. Measures almost 22" tall, with a 7 1/2" cast iron base. Appears operational, but is missing the burner. Very Good-Excellent

Demonstration Model of the Single-Cylinder Steam Engine "Lady Margaret" Hand-cranked museum model, polished steel, brass and cast metal, mahogany-lagged cylinder Ø 3 1/5 in., crosshead guide in l

Large vintage West Germany Steam Engine plant model. Only looks like missing glass part and dial scale of the gauge. Marked "Made in West Germany 14/0". Base size is 14.75" x 16.5". ~~ DEAR BIDDERS, P