8" Diameter Brass Crosby Steam Whistle

Crosby Steam Gauge & Valve Company Boston US Patent Jan 30, 1877 marking in a single line in small lettering along the base. 27.5" X 8" diameter.

This is brass Crosby steam whistle in nice used condition. Overall height of 15 inches, with whistle body measuring 8 inches.

Apprx 6 1/2" in diameter. 20 1/2" from top cap/nipple to fitting at base. Fitting is 2" inside diameter

AB 199. Philadelphia. Acorn finial. 36" tall x 8-3/4" diameter. On a custom made stand. An impressive example

Jan. 30, 18-7, Crosby Steam Gauge and Valve Co., Boston. 19" tall x 5.5" diameter.

Brass and aluminum. Approx 2" in diameter and 8 1/2" long

A 4 chamber 2" diameter brass whistle with a 4 sided nut pointed finial. The 6 sided base nut has some markings. The cylinder is 4" tall and overall it stands 8" tall. There is a marking of 19430 on t

A large, heavy cast brass or bronze step-top steam whistle, the bottom bell is approximately 6.5 inches diameter with a 1 7/8 inch gap from the bowl to bell, the chambers are approx 4 1/8w x 4h inches

A nice three chamber brass whistle. It has a 5" diameter, 10" tube, 16" total height including top to feed pipe entry. It is big and heavy. It has a long "Crosby Steam Gauge Valve Company Boston Mass

A nice three chamber brass whistle. It has a large 6" diameter, 12 1/2" tube, 20" total height including top to feed pipe entry. It is big and heavy. It has a long "Crosby Steam Gauge Valve Company B0

A very nice Crosby Steam Gauge Company product from Boston. It has that information and a Jan 30, 1877 patent on the base area. It's a 3 chime. It has a 2 1/4" diameter and it stands 6" tall. It has a

Crosby Steam Gage & Valve Co. brass 3-tone steam whistle stamped 6207, polished, 5"x20.5" with 10"L tube

Brass steam whistle. 3" diameter, 6" tube height, 13 1/2" total height. Piston does move on valve..

A 39" tall, 8" diameter bronze single-chime steam whistle from an Atlantic coastal freighter. Bronze bowl has been cleaned and lacquered. Fits 2" NPT. Shroud is painted black. This is not a standard s

A large brass steam whistle with a 6" diameter. 3 chambers 2 1/2" feed pipe, 22" total height with a 14" chamber height, dome top. Threads seem to work, lock nut on top, numerous dings, some sticky la

A nice Lunkenheimer brass whistle that has been mounted on a counter-balance weight. It's got a dome top with acorn finial. It has 3 /200 opposite the maker marking. Single chamber, 14" total height,

A large brass steam whistle mounted on a cast iron base. The housing measures 5" in diameter. It has a nice acorn finial. The cylinder measures 7" tall. The base hex nut measures 2 1/2" across so it's

A Kinsley brass whistle with square nut finial. 4 chambers, stands about 8" tall. Good condition with a different metal finish to the tube.

3"x12" brass steam whistle / 8"L brass valve or whistle

Vintage Brass Steam Whistle. Whistle measures 8" X 4" || Please carefully read our terms of sale, shipping information, and request any condition reports or photos prior to placing a bid. Any conditio

Stamped L1, 33M?, 660C37. The whistle is 18.5 tall x 6.5" diameter

Acorn finial. 37" tall x 10" diameter. Nice Patina, impressive example

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm

Brass 6" diameter with 12 1/2" chamber length. Acorn finial, no markings. It is mounted on a wooden base with room for another whistle on the stand. The whole unit stands about 23" tall. The control a