Bronze Locomotive Railroad Bell

Antique Bronze Railroad Locomotive Bell with Iron Holder Frame. size: 24.5 x 14.5

A bronze locomotive bell from Boston & Maine Railroad #2658. This bell was sold by the Boston & Maine in 19xx. We have the original B&M reclamation tag sting the weight of 242 pounds and the original

BELL, APPEARS TO BE POLISHED BRONZE AND IRON. MOUNTED ON A BLACK IRON STAND. EXTREMELY HEAVY. 26" HIGH WITH HANDLE, 21 1/2" WIDE, 16" DEEP. BELL IS 16" HIGH, DIAMETER 17". EXCELLENT WORKING CONDITION.

A 19th century Bronze Locomotive Bell with Cast Iron base and frame. Stamped marks on Bell include "1883,1888, 1898" and others, frame is cast #80140. Old painted finish with wear. 14 1/2" diameter be

A Bronze Locomotive Bell united states, circa 1900 15" W x 12.5" D x 18.5" H Estimate $600-800

A Bronze Locomotive Bell united states, circa 1900 15" W x 12" D x 18" H Estimate $500-700

EMD locomotive bronze bell, 8004158, smooth surface, clapper marked BR-83 Viloco Chicago, 12" at base, bell weights 20 lbs plus clapper weight 3.2 lbs. Good condition.

Original bronze railroad bell. Stands 18" not countint mounting brackets. 18" W.

LOT (3) EARLY BRASS/BRONZE LOCOMOTIVE RAILROAD WHISTLES, 19TH C., H. 7" (SIGNED CROSBY STEAM GAUGE CO.)

Compressed Air Powered, Working Condition when hook up to compressed air. 12.5 x 23.5 inches, stamped 280574 .

Signed 'Prime-Wilw.' and 'BR10.90' on the clapper. Mount marked '8044623 REV along with conjoined HF monogram. Measures 11.5 in height with a 11.75 circumference of bottom rim of bell. We happily prov

A 16" cast bronze steam locomotive bell mounted in a very heavy cast iron yoke with a hex nut finial. There appears to be provisions for an air ringer on the lever side. Clapper is intact. Bell shows

I am not sure which locomotive this little bell is from but it is from the Alan Thomas collection and his wife can’t remember which locomotive it's from. It has no markings. Certainly not a lar

Leslie Tyfon 200, with brass diaphragm, for steam or air. Size: 10 x 18 x 26 in.

Bronze diesel train locomotive bell, marked "EMD" and "8004150" height 17 in. x width 11 in. x depth 11 in. Provenance: a Rockport, Texas collection Condition: Missing clapper We happily provide

Leslie Tyfon A-75-440 bronze locomotive horn. These numbers are cast / stamped into the side of the horn. Horn retains original red paint and is in as removed from railroad service condition. See phot

Illinois Central Railroad Steam Locomotive Bell - Possibly from a 2-8-2 Illinois Central Railroad Steam Locomotive Bell. The bell has ICRR M-C cast into the top of the bell along with 04074. The numbe

Leslie Tyfon A200-LP cast bronze locomotive horn. Horn shows some remaining paint after being sandblasted. Number stamped on the manifold is 5569. Horn has some minor tool marks and wear, but is in go

Large vintage brass railroad / railway locomotive bell. Consignor claims bell came from from the CM & St. Paul Railway. It is marked " 2879" , "102419" and "44D". It appears to be in good condition wi

Leslie Tyfon A-125 cast bronze locomotive horn. Horn is 23" long and plays a G# note. Number stamped on the manifold is 5518 . Horn has some minor tool marks and wear, but is in good condition for the

Stamped PRR (Pennsylvania Railroad), 15.75" diameter of bell x 20.5" tall. Iron frame.

This bronze bell is air-powered (pneumatic) for locomotive use. It measures 9 in. high and 12 in. in diameter with a piston driven clapper. No maker identification. Compressed air moves the clapper at

Boston & Maine Railroad steam Locomotive Bell #3237. This bell has an additional stamping of 1449? It's 144x. This 144x lettering is larger than the standard Boston & Maine stamping of 3237. B&M #144x

Santa Fe Railroad Steam Locomotive Presentation Bell w/ Plaque Bell has a 4 1/2" plaque attached to the bell which reads, "Presented by A.T. & S.F. R.Y. CO. 1954" The bell is 16 3/4" in diameter and m