Harry Bertoia (1915 - 1978) Bench model "Slat bench".

Harry Bertoia (1915-1978) Slat Bench Knoll International, USA lacquered ash, enameled steel with partial manufacturer's label H 15 1/2 x W 54 x D 18 1/4 inches This lot is located in Chicago. Property

Harry Bertoia (Italian/American, 1915-1978) Slat Bench for Knoll International, Ebonized Wood and Chrome, 15-1/2" H, 72" W, 18-1/2" D. Slats have scratches consistent with age & use; (2) heavier scrat

Harry Bertoia (Italian/American, 1915-1978) Slat Bench for Knoll International, Ebonized Wood and Chrome, 15-1/2" H, 72" W, 18-1/2" D, There is light pitting on the metal legs. Also, some light scratc

Harry Bertoia (1915-1978) for Knoll Associates slat bench New York, New York, 1952 lacquered ash, enameled steel Knoll sticker label 82"w x 18"d x 15 1/2"h

Harry Bertoia, Italy (1915-1978). Bench designed by Harry Bertoia for Knoll has teak slats and black iron legs, circa 1960's. Measures 15.5"H x 18.25"W x 66"L. Condition report: good condition, see ph

Harry Bertoia slat bench Knoll InternationalUSA, 1952 / c. 1965ash, enameled steel15.5 h × 66 w × 18.25 d in (39 × 168 × 46 cm) Literature: Knoll

Dimensions: H 16” x W 60” x D 15.5” Condition: Some surface wear. Few pieces slightly loose, does not seem to affect sturdiness.

A Harry Bertoia for Knoll slat bench. Signed on leg. Dimensions : 15 x 72 x 15.5. All measurements are in inches. Height x Width x Depth

In the manner of Harry Bertoia Slat bench c. 1990lacquered wood, chrome-plated steel 15.25 h x 72 w x 19 d in (39 x 183 x 48 cm) This work will ship from Chicago, Illinois.

Harry Bertoia - Knoll Slat Bench. Dimensions 15.5x82x18.5

Enamel Steel Legs. From a Westport, CT estate. - Dimensions: 72" w x 18.75" d x 15.5" h.

Description - Harry Bertoia for Knoll slat bench. Dimensions - 15" x 72" x 18"

Description - Slat bench, in the manor of Harry Bertoia. Dimensions - 16" x 72" x 19"

Harry Bertoia Y Base Slat Bench Table. Black iron rod base, long wood slat coffee table. Knoll International Label.-- Dimensions: H: 15.25 inches: W: 82 inches: D: 18.25 inches ---

The Signed Knoll Bench does have some Nicks, a few Scratches, and a Small Divot to the Ebony-Colored Wood, but it is in Overall Good Condition. The Chrome Portions look Flawless. The Bench measures 15

Circa 1970s, oak slatted seat on enameled steel frame, with Knoll label on underside h. 15-1/2 w. 66 d. 18 in. Provenance: Private collector, Pound Ridge, NY Harry Bertoia (Italian-American, 1915-1978

Slat bench, New York, 1970s; Enameled steel, oak; Unmarked; 16" x 66" x 18 1/4"

Harry Bertoia (American 1915-1978) for Knoll, set of four black Diamond coated wire chairs, model No 421LU, accompanied by vinyl seat covers, chairs are unmarked, seat covers have "Knoll" to underside

Harry Bertoia (Italian-American, 1915-1978). Side chair, 1969. Steel rods, molded plastic. Designed for Knoll. Model 427. Height: 30 3/8", Length: 20 1/2", Depth: 19", Seat Height: 17 3/4" each. Two o

Harry Bertoia (Italian-American, 1915-1978). Side chair, 1969. Steel rods, molded plastic. Designed for Knoll. Model 427. Height: 30 3/8", Length: 20 1/2", Depth: 19", Seat Height: 17 3/4" each. Two o

Harry Bertoia, Bench '400', 1951, H. 38.5 x 167.5 x 46.5 cm. Made by Knoll International, New York. Metal rods, painted black, wooden slats., Rouland, Knoll Furniture 1938-1960, Atglen 1999, p. 112; K

Harry Bertoia, Bench '400', 1951, H. 48 x 183 x 47 cm. Made by Knoll International, New York. Wooden slats, painted black, chrome-plated metal rods, cushions with red textile covering., Rouland, Knoll

Harry Bertoia, '400Y' bench, 1951, H. 38.5 x 182.5 x 47 cm. Made by Knoll International, New York. Metal rods, chrome-plated, wooden slats, painted black., Rouland, Knoll Furniture 1938-1960, Atglen 1

1972 HARRY BERTOIA KNOLL INTERNATIONAL BENCH, BLACK FINISH METAL FRAME, WITH ORIGINAL KNOLL INTERNATIONAL LABELS, MODEL 424 ON A SLED BASE