Vintage Retro: A set of six Herman Miller DSS Eames

A set of six stacking 'DSS' chairs by Charles and Ray Eames for Herman Miller. 32 x 23.5 x 21. All measurements are in inches. (Height x Width x Depth).

A set of six stacking 'DSS' chairs by Charles and Ray Eames for Herman Miller. 32 x 23 x 22. All measurements are in inches. (Height x Width x Depth).

Set of SIX Contemporary Herman Miller / Eames Bucket Chairs. Purchased at Design Within Reach. Each of the six measures 31 x 24 x 21 inches. From a custom built and designer decorated Rowayton, CT bea

Set of six authentic molsws plywood chairs in three different colors. All manufactured by Herman Miller. Chairs were purchased between 2007-2010 and have original paperwork. Chairs retail for $1100 ea

SET OF SIX VINTAGE HERMAN MILLER SIDE CHAIRS. Height: 30 in. by Width: 20 in. by Depth: 20 in.

These Chairs have Yellow Vinyl Seats. Some of the Seats have minor Cuts and Marks on them. One of the Chairs is missing its Plastic Disc Foot. These measure 31 1/2" Tall and 18 1/2" Wide. Third-Party

Set of Six Herman Miller Vintage Upholstered Arm Chairs. Company label attached on the bottom side. One chair is smaller than the rest. Smallest measures 29-1/2" x 22-1/4", 16-1/2" seat height. Others

Set 6 vintage Eames, Herman Miller Eiffel tower base chairs, 4 vinyl covered, two striped fabric, 4 chairs have broken frame joint, where the back meets the seat, one has missing nylon foot cap, some

Charles and Ray Eames DAXs, set of six Herman Miller/Zenith PlasticsUSA, 1950molded fiberglass with rope edge, zinc-plated steel, rubber25 w x 24.5 d x 29.5 h in (63 x 62 x 75 cm) Signed wi

Charles and Ray Eames DSRs, set of six Herman MillerUSA, 1950molded fiberglass, zinc-plated steel, rubber, plastic 31 h × 18.25 w × 21 d in (79 × 46 × 53 cm) Mold

Charles and Ray Eames DCWs, set of six Herman MillerUSA, 1945molded ash plywood, rubber 29 h × 19.25 w × 21.5 d in (74 × 49 × 55 cm) Literature:

Charles and Ray Eames Herman Miller Set of Six dining chairs (DCM) USA 1980s Ash plywood & chromed steel Unmarked. Dimensions: H 30" x W 19.5" x D 20"Condition: A few professional re-glued mounts. Som

Arm Shells, set of six. Herman Miller USA, 1960's. Fiberglass, zinc plated steel, plastic, rubber. Original manufacturer's label. 25w x 24d x 27h.

Charles and Ray Eames DAX-1s, set of six Herman MillerUSA, 1950 / c. 1975molded fiberglass, vinyl, zinc-plated steel, rubber, plastic26 w x 25 d x 32 h in (66 x 63 x 81 cm) Signed with mold

Set of six(6) fiberglass single moulded shell chairs. Black vinyl upholstery. Steel legs. Eames design for Herman Miller. Labels at the underside; 31.5in.H. x 18.5in.W.

Six 1950's Herman Miller DSS stacking chairs designed by Charles & Ray Eames. Two Orange, two Blue/Grey and two Oatmeal color. Molded fiberglass seats with painted metal bases. Some wear and paint los

Charles and Ray Eames (American, 1907-1978 | American, 1912-1988) Set of Six DCM Chairs Herman Miller, USA walnut plywood, chrome-plated steel, rubber manufacturer's decal and paper labels to undersid

1970’s. Upholstered, chromed steel and vinyl chairs designed by Eames for Herman Miller. Stamped “Designed by Charles Eames†on seat bottoms. H30 ½†W20†D20â€

An Eames for Herman Miller Conference Table. Together with a set of six Eames "Soft Pad" chairs Table: 28" x 72" x 36"

An Eames for Herman Miller Conference Table. Together with a set of six tan leather and aluminum Eames Group chairs Table: 28" x 72" x 36"

An Eames for Herman Miller Conference Table. Together with s set of six Global Allies office chairs Table: 28" x 72" x 36", back ht: 36.5"

Description - A set of six Aluminum Group Management Chairs by Charles and Ray Eames for Herman Miller in saddle leather. Dimensions - 33.5" x 23" x 2"

Set of six estate found LTR tables by Charles Eames for Herman Miller, 1950s.

A set of six 'PSC' (Pivoting , Side Chair, Cast Aluminum) chairs by Charles and Ray Eames for Herman Miller with stitched seat covers. 31.5 x 24 x 24. All measurements are in inches.