ITALIAN BORLETTI PEZZI & CORBETTA REGULATOR CLOCK

Seth Thomas No. 10 Wall Regulator Clockcirca 1886walnut case, 8-day time only movement with sweep seconds, deadbeat escapement, maintaining power and fancy mercurial pendulum, movement signed with Set

Circa 1870's Gilbert #8 Jeweler's Floor Regulator with Egyptian head crest , porcelain dial & large lyre pendulum. Clock 106" tall, 33" wide, 13" deep. Good condition.

Seth Thomas walnut regulator clock with single brass weight. ht. 52in., wd. 18 1/2in. Provenance: Property from the Estate of Frank Perrotti Jr. of Hamden, Connecticut

Gilbert No. 8 Hanging Jewelers Regulator Clockcirca 1910the cherry case with carved foliate and a maiden's head, 12-inch porcelain dial with Roman hour numerals, 8-day movement with pinwheel escapemen

E. Howard #11 Keyhole Wall Regulator Clock E. Howard Company Boston, Massachusetts. Circa 1895. Rosewood case. Original painted metal dial and tablet. 8-day time only movement. Ht. 32 in. Collection o

Walnut Jeweler's Pinwheel Regulator Clock. 11-inch porcelain dial with black Roman hour numerals, open moon hands, sweep seconds hand and brass bezel, typical pinwheel regulator movement, pinwheel esc

E. Howard and Co. #59 Vienna Regulator Clock all in walnut carved case with original finish, measures approx. 46" to bottom, 8" dial, glass sides, all finials, pendulum and weights are there. Beautifu

(8) day time Length- 85" Width- 20" No in-house shipping available for this item View our list of Recommended Shippers

French Gilt Brass & Marble Crystal Regulator Clocklate 19th centurygilt brass with beveled glass panels and marble trim, 8-day brass spring driven movement with bell strike, movement is signed "M

A French Japy Freres signed Regulator Clock with a handpainted Limoges style cameo panel being initialed lower right. M. Hairkram Written on Clock Face. A Fine Clock.Dimensions: 17"h X 9.5"wInv. 128

E. Howard and Company oak wall regulator clock, circa 1913. Oak case with original surface, white dial with oak bezel. Gilt wood pendulum shaft with large brass capped bob. Photos of original installa

Ansonia Pinwheel Jewelers Wall Regulator Clock. Large walnut rectangular case, molded cornice surmounted by carved crest and finail. The dial has a Roman numeral chapter ring that is mounted within a

With painted steel dial with Roman numerals, signed E. Howard & Co./Boston, with original brass weight driven 8-day time only movement and pendulum and replaced brass weight. Walnut case with gallery

A 19th Century German Wall Mount Regulator Clock. 90" x 22" x 10.5"

Wm. L. Gilbert Clock Co., Winsted, Conn., "Regulator No. 8 Standing" jeweler's regulator in a cherry case with burl panel on backboard, carved crest with Egyptian motif, roman numeral white enamel dia

Ansonia Clock Co., New York, NY, "Regulator No. 14" hanging jeweler's regulator in a carved walnut case with carved appliques and crest, roman numeral white enamel dial with sweep seconds, 8 day, time

Baroque Style Two-Weight Vienna Regulator Clocklate 19th centurymahogany veneer case with ebonized wiood carvings and turned finials, 8-day two-weight time and strike movement with maintaining power,

Boston Clock, Co., Boston, Mass., an unusual hanging regulator clock, the cherry with carved dial surround and broken scroll top, roman numeral painted metal dial, moon hands, and 8 day, weight driven

A turn of the century Ansonia Emperor model Crystal Regulator clock. 8-day time and strike movement with visible escapement, two part porcelain dial with Arabic numerals and faux Mercury pendulum. Gil

Seth Thomas No 11 mahogany weight driven regulator clock, 56" x 16-1/2" x 8", The depth of the waist is 6-1/2"

Very large Howard & Davis of Boston "No. 2 regulator clock with rosewood case. Appears to be all original. Crack to botom glass.44" HSTERLING ASSOCIATES STRIVES TO PROVIDE ACCURATE, OBJECTIVE, & FAIR

A Beautiful Clock in Good to Very Good Overall Condition. It is a 4 or 5-Chime Clock (See Photo). The Clock has some Lightened Areas in the Wood, and some Small Cracks in the Case Just Under the Dial.

1890's William L Gilbert jeweler's regulator clock, two part walnut case floor model, overall height 90", with 11" enamel dial, originally from the H. R. Kimball Pharmacist & Jeweler in Hardwick, VT (

Probably Vienna, Circa 1900, Triangle Pediment, Fluted Stiles, Enamel Clock Face With Roman Numerals, 75h X 22w X 9.25d Trim That Holds Large Glass In Place Is Loose. Clock Works Present But Function