US Navy Operators Manual - DAPCO Diving Air Compressor

This lot consists of three original diving manuals. The first is a pair of US Navy manuals, volume 1 dating to June 1985 and volume 2 dating to May 1991. The third publication is an original and detai

Three original United States Navy diving manuals. The oldest is from January 1959 with parts 1 and 2 present, overall nice condition with original owners name written in ink on top cover, approximatel

We have what appears to be a post World War 2 US Navy LARU (Lambertsen Amphibious Respiratory Apparatus) unit. In the 1957 US Navy diving manual one of these is shown in section 3.5.4 under closed cir

Grouping consists of the following; hardbound book American Dive Catalog Collection by Ray Mathieson, Manual De Bueo Deportivo, US Navy Diving Manual Vol 2 May 15 1991, hardbound Manual For Divers Pre

This vintage brass cap would be threaded on to the Mark V diving helmet air fitting or the end of the non-return valve. Excellent condition. All items will be shipped with a signature required upon de

This is a pair of authentic US Navy manuals. The first is a NAVSHIPS 394-0065 UNCLASSIFIED Technical Manual AQUA-LUNG MODEL DA “AQUA-MASTER” DEMAND TYPE DIVING APPARATUS U.S. DIVERS CORPOR

JAEGER-LECOULTRE - a limited edition gentleman's Master Compressor Diving Alarm 'U.S. Navy Seals' bracelet watch. Number 0526 of 1500. Titanium case with PVD-treated calibrated bezel. Reference 160.T.

Nice example of a air control valve. This piece of equipment was used in conjunction with the US Navy Mark V diving helmet. The air control valve was attached to the whip, which attached to the air fi

This lot consists of a US Navy Mark V diving helmet T wrench and air fitting cap. The wrench is used for the removal and installation of the 12 wing nuts on the outside of the breastplate. This exampl

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

This is an original grouping of used diving equipment parts. The parts include an air control valve with a US Navy inspection stamp, an air hose filter housing stamped Morse Diving Equipment, air hose

Like new with original cardboard thread protectors is this Morse Diving Equipment air control valve. This piece of equipment was used with the US Navy Mark V diving helmet. It attached to the bastard

Before Morse could certify a Mark 12 diving helmet ready, it had to be pressure tested. A plate like this would secure to the Mark 12 helmet and then air pressure applied. Brass part weighs approximat

Excellent condition Mark V divers whip. This air supply house connects to the air fitting on a Mark V helmet and also to the air control valve. This whip was made by Republic Rubber during October 197

Offered here is a reprint of original 1978 US Navy Navsea operations and maintenance instructions manual housed in 3 ring binder. This is the full and very detailed manual the government used when ser

Offered here is a reprint of original 1978 US Navy Navsea operations and maintenance instructions manual housed in 3 ring binder. This is the full and very detailed manual the government used when ser

Offered here is a reprint of original 1978 US Navy Navsea operations and maintenance instructions manual housed in 3 ring binder. This is the full and very detailed manual the government used when ser

Nice original air control valve made by Schrader. This is the type of valve used with the Mark V diving helmet. This piece does have the Schrader name stamped on it as well as a US Navy inspection sta

A heavy authentic brass and copper US Navy diving helmet Mark V Model 1 from Diving Equipment Supply Co dated 2009. Size: 20 in high x 16 x 14. VG condition. Weighs 65 lbs.

Early 20th c. Oak Chest, with exposed dovetailed construction, side handles, hasp and front eagle-topped plaque: "U.S. Navy Standard Diving Apparatus, A.J. Morse & Son Inc., Boston, Mass.", interior w

A brass and copper diver's helmet having applied U.S. Navy Diving helmet plaque. Ht: 17.75" Wd: 17" Dpth: 20"

Boston, MA. Made of brass and copper, polished and in good condition. 18" tall and comes with a custom wooden display base. This is a later model made for display.

Quality Handmade Reproduction of Vintage U.S. Navy Diving Helmet Mark V, Aqualung with aging effect. Made of solid steel iron and brass metals. Full Size: approx. 18 inch (45.72 cm) Head size: approx.