Weeden Vertical Steam Engine, Red cast iron base,

Weeden Steam Engine with Cast Iron Base.

Doll et Cie vertical steam engine, tin boiler with a cast iron base, embossed D & C on the underside, 14 1/2'' h.

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, vertical form of a

An early 20th century engineers model vertical steam engine, of brass, iron and steel construction, the double frame with top mounted cylinder and mounted to a cast iron base

Circa 1905, 6" square cast iron base, top appears complete and shows light playwear with minor burning, no burner, C7

Brass & Steel with cast iron base, 6” square. It appears intact and complete, minus burner. Shows light playwear. From the Clint Miller Collection.

Unmarked but probably Doll Company, all original stacks. Fairly similar except for size; small, medium, and large. Cast iron footed bases. Condition: (Very Good - Excellent). Dimensions: Largest: 11 -

Great large vertical early steam engine probably made by Faulk. Measures almost 22" tall, with a 7 1/2" cast iron base. Appears operational, but is missing the burner. Very Good-Excellent

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL V10 MODEL STEAM ENGINE AND FEED WATER PUMP,cast-iron, steel, and brass, base fitted with two tabs for securing base and some po

One on footed base, vertical. Second is horizontal on cast iron base. Condition: (Very Good - Excellent). Dimensions: 7 - 1/8" x 4" x 9 - 1/2".

American. 1940s. Cast iron, nickel plated brass and painted components. Repainted base and shroud. Stamped, "Weeden Trade Mark Reg U.S. Pat Off". Horseless Carriage Museum, Fenelon Falls, Ont. 9.5 x 4

Vertical style with burner on bottom. Cast iron base. Nice detail. Condition: (Very Good). Dimensions: 10 - 1/2" x 10" x 7".

MODEL TRAIN STEAM ENGINE WHEEL & PISTONS Wheel and piston portion of a model steam engine, cast iron base and brass mechanisms. Not marked. Size: 15L x 8.5H x 9.5W"

Early Marklin Germany vertical toy steam engine with cast metal base. Appears to be in overall good cosmetic condition with paint loss, light surface rust, and wear from use and age. Does appear to be

A German tin toy steam engine, circa 1900, mounted on a cast iron base signed "JF 527" (manufactured by the Josef Falk Company of Nuremberg, Germany) - retains original tin burner. Fair condition - su

Radiguet & Massiot Vertical Steam Engine, c. 1914 Paris, type 5015, cast iron, steel and brass, boiler Ø 6 ¼ in., flywheel Ø 7 4/5 in., size 18 ¼ x 9 ½ in., separate burner (added), water gauge

Nice early C&O 1915 steam engine locomotive cast iron eagle statue with 1915 base. Nice condition with an older repaint and wear from use and age. Measures approximately 30 1/2" across by 12" deep by

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS TWIN-CYLINDER MARINE LAUNCH MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, mounted on

ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY BEAM MODEL STEAM ENGINE, design of Watts parallel motion, cast-iron base with raised lettering "STUART" and impressed "80083", brass and steel, pai

Hyde Co. marine double cylinder vertical steam engine, early 20th c., cast brass and iron. 26" h x 22" w x 12"d

Cast iron base 23cm x 13.5cm, steam whistle, safety valve, water level indicator, oiler, water cock burner with 2 flames. Runs with compressed air. Condition: (Original). Dimensions: 10" x 5 - 1/4" x

Steam whistle, weight safety valve, water level indicator, round burner, cast iron base diameter 12.5cm. Height 27cm, wheel diameter 8cm. Runs on compressed air. Condition: (Original). Dimensions: 5"

One is a No. 37 with force pump on a hand painted metal base. Two others, one on footed base and one on hand painted base. Some paint loss and wear to bases, all have original stacks. Condition: (Very

2 Bing Steam Engines, c. 1930 Bing Werke, Nuremberg. 1) Stationary steam engine, brass boiler, length 10 5/8 in., fixed cylinder, 2 flywheels, cast-iron base, heavily restored, untested. (4/-) - And: