Miller Dunn Shallow Water Diving Pump & Air Tank

This is a classic Miller Dunn model 1a shallow water diving air pump. This style of pump was used with all three models of Miller Dunn helmets. The pump does come with a custom handle. Accompanying th

This is a nice original Miller Dunn model 1A shallow water air pump. This example retains the original handle with wood end. The pump frame is cast iron. Both cylinders are clearly marked Miller Dunn

At first glance, this may appear to be a standard Miller Dunn shallow water pump. While its configuration is similar, this one was made by Bishop & Babcock Company in Cleveland, OH. Both cylinder caps

Featured is an early style model 1 Miller Dunn divers air pump. This type of pump was sold with the famed Miller Dunn Divinhood shallow water helmets. Also included is a vintage handle for the pump. T

While Miller Dunn pumps generally are not particularly rare, an early model No 1 made of brass is. A vast majority of Miller Dunn shallow water pumps surviving are model 1A. According to the book The

While Miller Dunn pumps are generally not rare, an early model No 1 made of brass is. A vast majority of Miller Dunn shallow water pumps surviving are model 1A. According to the book The Divinhood by

During World War 2 the standard US Navy shallow water diving helmet was the Divinhood Style 3. These helmets have a classic appearance and were popular to use even after the war. The Divinhood Style 3

During World War 2 the standard US Navy shallow water diving helmet was the Divinhood Style 3. These helmets have a classic appearance and were popular to use even after the war. The Divinhood Style 3

Regarded by many as the most desirable shallow water diving helmet ever produced, is the Divinhood Style 2. This unique helmet was made by the Miller Dunn Company located in Miami, Florida. Miller Dun

During World War 2 the standard US Navy shallow water diving helmet was the Divinhood Style 3. These helmets have a classic appearance and were popular to use even after the war. The Divinhood Style 3

During World War 2 the standard US Navy shallow water diving helmet was the Divinhood Style 3. These helmets have a classic appearance and were popular to use even after the war. The Divinhood Style 3

Shallow Water Diving & Spearfishing, 1954. An essential book on the launch of American diving and spearfishing. This is the greatly expanded second edition and content features Miller Dunn, Morse and

This is a very nice original Morse Diving Equipment Model 15 air pump. This is the same put that would accompany the Model 15 shallow water diving helmet. The original two piece cast iron handle and b

WWII era Morse Diving Equipment model 15 shallow water diving pump, serial 6902 with USN inspection stamp. Measures 21 inches wide, 29.5 inches tall with the handle. Should have a 2nd section of handl

Brass Diving pump is approx 11 1/4" in diameter and 26" tall.

Miller-Dunn Co. Miller Dunn Divinhood Style 1 Shallow Water Helmet Patent 1916. Stamped. Metal helmet. Rare example. Well worn with dents and expected patina. Good to fair condition. 21”h x 11&#

Pair of original Miller Dunn components often missing with the famous Divinhood helmets the company produced. This lot consists of an original Miller Dunn No 1A hand powered air pump. These pumps were

Nice set of Miller Dunn lead weights for the Style 3 shallow water Divinhood helmet. These weights are contemporary. Front weight is 8.5 pounds, back weight is 18.5 pounds. Each is stamped with the co

Nice set of Miller Dunn lead weights for the Style 3 shallow water Divinhood helmet. These weights are contemporary. Front weight is 8.5 pounds, back weight is 18.5 pounds. Each is stamped with correc

Great looking set of Miller Dunn lead weights for the Style 3 shallow water Divinhood helmet. These weights are contemporary but have developed some age giving them a truly old appearance. Front weigh

This is an excellent example of a Snead Company shallow water diving helmet. The helmet is made of cast iron with an acrylic window. A small brass threaded air fitting is located behind the handle on

This is a Thompson Engineering Company (TECO) shallow water diving helmet. This helmet or rubber mask utilizes twin air hoses that hook to a TECO union. Masks like this were used for shallow water div

This is a nice all original unrestored and untested No. 17 divers air pump. It was likely made by Morse but their name is not found anywhere on the pump. A serial number on one side, 7153, is consiste

American. 1920s. Cast iron and brass. This heavy pump has two reciprocating cylinders mounted astride a support with pivoting rocker arms. The steel handle used at the top of the rocker is pushed back