Brass single chime Lonergan steam whistle

2"x9" brass single chime Lonergan steam whistle

Brass, single-chime railroad steam whistle, about 20 inches tall and 1-3/4 inches in diameter. Has two orifices but only one undivided resonating chamber above them. Windways are unobstructed. Brass s

Single Chime Brass Steam Whistle Single chime brass steam whistle measuring 9 1/4" tall with 3/4" inlet. Nice condition with a more ornate acorn. Red paint on the body has been restored and no additio

**For an in-house shipping quote, please reach out to us at rockauctiongallery@gmail.com** Railroad steam whistle by an unknown manufacturer. This item is likely brass, but has been tarnished over tim

14 1/2" Tall Single Chime Steam Whistle Whistle valve has a 1" diameter inlet and the body is stamped with 44 1/2". Lever moves freely and returns to original position. The bell is clean with no notab

Lonergan brass steam whistle. 9 ¼" x 2 ?".

12" Single Chime Steam Whistle Bell measures 10 1/2" tall and has an 1 1/4" inlet. The bell has two moderate grinding marks which have opened up pinhole leaks in one side of the bell. No manufacturing

A 39" tall, 8" diameter bronze single-chime steam whistle from an Atlantic coastal freighter. Bronze bowl has been cleaned and lacquered. Fits 2" NPT. Shroud is painted black. This is not a standard s

Provenance unknown, but came from Northwestern United States and resembles Northern Pacific RR whistles of that time period. 5" diameter shroud, replaced valve and a nicely repaired acorn finial. Fits

Norfolk & Western Railway "Hooter" Whistle. All brass whistle single chime whistle from the N&W Railway. These famed whistles earned the nickname of "hooters" for their distinctive sound they produce

Lunkenheimer 3 1/2 Single Chime Steam Locomotive Whistle The valve body is marked Lunkenheimer on one side w/ 3 1/2" on the other side of the body. The lever is case with Pat. Mar. 26. 1918 on one sid

AB 199. Philadelphia. Acorn finial. 36" tall x 8-3/4" diameter. On a custom made stand. An impressive example

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm

This is a Lunkenheimer three inch, three chime steam whistle. Dome top, with a patent date of June 7, 1892 on the base. Nice original piece, complete with lever.

4782. 3786. 13.5" tall x 4" diameter

Very well built brass steam whistle. Four different chimes. 16" Excellent

Brass, three-chime railroad steam whistle, about 15 inches tall and 1-3/4 inches in diameter. Has three orifices, each with its own resonating chamber above it. Windways are unobstructed. Brass surfac

Three Chime Brass Steam Locomotive Whistle Whistle measures 11 1/4" tall with a 4" diameter bell. The inlet size is 1 3/4". The bell has an 1 1/2" shallow dent near the top and other minor areas of pi

A small brass whistle with accompanying pump air chamber, made in brass and copper. Single-chime brass whistle measures 7" high with pointed hex finial. Pump air chamber measures 4" diameter with wood

A single chime brass whistle by Crane Company measuring 10 1/2". Crane 125 is cast into the valve body. Some minor nicks along the top edge and a few spots of rust but no major condition issues to not

22"x6 3/4" Whistle, Total Dimensions 60"x7", 2 1/4" OD

Gee Cee Three Chime Brass Step Top Steam Whistle Whistle measure 8" tall with an 1 1/4" inlet. Side of the hex on the valve stamped with Gee Cee Co. PT Huron M. Valve moves freely and no notable damag

Steam Whistle, large brass single note w/exterior valve (arm missing), apparently unmarked & cylinder possibly reduced, Good+ cond w/verdigris patina, 21"H.

11 1/4"x 2 7/8" Whistle, Total Dimensions 12 1/4"x3 1/2", 1" OD