SMALL STEAM WHISTLE.

A small single-chime Lunkenheimer whistle with a cast actuation lever and valve intact. There is a spring-loaded secondary actuation that shortens the tube, maybe changing the whistle pitch or volume.

A bronze three-chime whistle with integral valve and actuation lever. Whistle measures 2" in diameter. Has an acorn finial and is mounted on a nice wood stand. Plumbed with a quick-disconnect on the s

Unmarked 6.75"x1.5"

Cretors Co. Popcorn Wagon Engine. Chicago: C. Cretors Co., ca. 1905. Motor-driven engine used to power a popcorn machine, with steam whistle and pressure gage; a small clown turns the glass vessel fil

Crosby Steam Gauge & Valve Company Boston US Patent Jan 30, 1877 marking in a single line in small lettering along the base. 27.5" X 8" diameter.

Brass. 9.5"x1.5" Small brass example

BING small standing steam engine, height: 31 cm, with burner, water level glass, whistle, good condition German Description BING kl. stehende Dampfmaschine, H: 31 cm, mit Brenner, Wasserstandsglas, Pf

Prewar Lionel O Gauge 259E 2-4-2 steam locomotive and unnumbered tender without whistle. Some surface rust on wheels and couplers, small dent to cab roof corner and sand dome. Trains should clean C5-6

Postwar Lionel O gauge 671 Pennsylvania 6-8-6 steam turbine locomotive with 2046W Pennsylvania Railroad whistle tender, in original boxes with inserts. Loco has older small touchups, otherwise train l

Lionel Postwar 671 O gauge Turbine 6-8-6 steam engine and 2671W tender. Powered, diecast locomotive, smoke, whistle. Tender has a small melt mark on the lower edge of one side. Otherwise, very good to

Approx. 6" x 7" x 5" tall. Has small dent on top by Whistle.

Lionel Postwar 2056 O gauge Hudson 4-6-4 steam engine and 2046W tender. Powered, diecast locomotivec, whistle, smoke, lighted. Small chip in tender coal step. Otherwise, very good condition with norma

Brass Steam Whistle, made by Vilogo Co., AW152, Comes with custom-made stand, 61 inches with stand

Crosby Steam Gage & Valve Co. brass 3-tone steam whistle stamped 6207, polished, 5"x20.5" with 10"L tube

Very unusual steam ship steam whistle, no lever, 8"x25"H without base

Stamped L1, 33M?, 660C37. The whistle is 18.5 tall x 6.5" diameter

This is a very impressive brass locomotive or ships whistle! It measures 27 inches tall and still retains the moving pull handle. The mounting flange is 5.5 inches in diameter and has 6 holes for secu

Acorn finial. 37" tall x 10" diameter. Nice Patina, impressive example

A large brass steam whistle with a 6" diameter. 3 chambers 2 1/2" feed pipe, 22" total height with a 14" chamber height, dome top. Threads seem to work, lock nut on top, numerous dings, some sticky la

Apprx 6 1/2" in diameter. 20 1/2" from top cap/nipple to fitting at base. Fitting is 2" inside diameter

A Brass Locomotive Steam Whistle 20th Century mounted to a metal base. Height 29 1/2 inches.  Property from a Midwest Collector

AB 199. Philadelphia. Acorn finial. 36" tall x 8-3/4" diameter. On a custom made stand. An impressive example

Jan. 30, 18-7, Crosby Steam Gauge and Valve Co., Boston. 19" tall x 5.5" diameter.

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm