Assorted Brass Steam Whistles & Parts

Four (4). Canadian & American. 1930s. Includes an exhaust whistle, a steam whistle missing its bell and a 7.5" (l) bell whistle, possibly from a pipe organ, and one spare lever.

Four (4). American. 1930s. Includes: 4.75" (l) x 2.25" (d), 5" (l) x 2.5" (d), 6" (l) x 3" (d) and 5" (l) x 2" (d) bells. One marked, "Crane 1/2 1505".

Vertical Steam Engine with Märklin Parts, c. 1930 Riveted brass boiler, length 8 1/4 in., Ø 3 1/2 in., with water level glass, manometer, steam whistle and safety valve, spirit burner, doubl

Three (3). Canadian & American. 1920s-40s. Solid brass. One is stamped, "The James Morrison Brass Mfg. Co., Toronto, Ont". Scattered minor scratches and light abrasions. Each retaining its correct fin

Three (3). American. 1920s-40s. Includes: 6" (l) 2.5" (d) Lunkenheimer "wildcat", Buckeye Brass Works 8" (l) 3.25" (d) 3-chamber fluted and Penberthy 5.25" (l) 3" (d) whistle. Center whistle stamped,

(2) Brass steam whistles: 13"H x 3.5"dia. / 5"H x 1"dia.

American. 1920s-40s. Includes: 6" (l) 2.5" (d) Lunkenheimer "wildcat", Morrison 6" (l) 3.25" (d) 3-chamber fluted and Penberthy 5.25" (l) 3" (d) whistle. Each hung with embossed cast pull tab. Minor t

Three early 20th century American Brass steam whistles. Largest by "Buckeye Brass Works, Dayton, O" and smallest by "American Steam Gauge and Valve Mfg. Co. Boston U.S.A.". Some surface wear and pitti

Western Brass Manufacturing, Husk 502 and unmarked. Tallest is 11.5"x2", Crane #125 Brass Steam whistle

One dome top. The tallest is 10" x 2"

Tallest is 6.5"

Horstmann and others. Tallest is 3.5"

Unmarked. 9.75"x2.5" and 7.5" x 1.5"

Twenty-five (25). American. 1910s-20s. Various markings include, "Detroit Lubricator Co. Detroit, USA", "Williams Ohio", "Penberthy", "Lube Devices Inc". 2 to 9.75" (l). Minor oxidation, tool marks.

Brass Steam Whistle, made by Vilogo Co., AW152, Comes with custom-made stand, 61 inches with stand

Stamped L1, 33M?, 660C37. The whistle is 18.5 tall x 6.5" diameter

Acorn finial. 37" tall x 10" diameter. Nice Patina, impressive example

A large brass steam whistle with a 6" diameter. 3 chambers 2 1/2" feed pipe, 22" total height with a 14" chamber height, dome top. Threads seem to work, lock nut on top, numerous dings, some sticky la

Apprx 6 1/2" in diameter. 20 1/2" from top cap/nipple to fitting at base. Fitting is 2" inside diameter

AB 199. Philadelphia. Acorn finial. 36" tall x 8-3/4" diameter. On a custom made stand. An impressive example

Jan. 30, 18-7, Crosby Steam Gauge and Valve Co., Boston. 19" tall x 5.5" diameter.

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm

Brass 6" diameter with 12 1/2" chamber length. Acorn finial, no markings. It is mounted on a wooden base with room for another whistle on the stand. The whole unit stands about 23" tall. The control a

22"x6 3/4" Whistle, Total Dimensions 60"x7", 2 1/4" OD