Benchmade 3 Part Dining Table By Wright Horne

Benchmade 3 Part Dining Table By Wright Horne. 119" W 48" D 29 1/2" H

Cherry Bench Made 3 Part Dining Table. 116 1/2" W 46" D 30 1/4" H

19th C Mahogany Banded Top 3 Part Dining Table W/4 Leaves. 149 1/2" W 47 1/2" W 28 3/4" H

Carved rosette and bell flower ends and tapered legs. All legs ending in casters. 2 console ends with drop leaf center. 46 1/2D X 30"H X 49"W/ 69"W/92"W/115"W 4 brass clips. (Property of a Mamaroneck

Mahogany Diminutive 3 Part Dining Table (Unsigned Craftique). 62 1/2" W 23" D 18 3/4" H

Old colony. Satinwood banded inlay. Each section approx. 38" L. 1940s era. (S) 162"L when open x 48"D Good condition.

Property De-Accesssioned from the Telfair Museums, Savannah, GA Description: George III Mahogany Drop-Leaf Table, Late 18th C, probably the center section to a 3-part dining table, the rectangular

Fine quality custom mahogany triple pedestal dining table. Each section is 35 in long and the center portion can be removed, total length 105 in by 48 in wide. Plus 2 large leaves at 22 in wide. About

Late nineteenth century three part mahogany dining table. Demi: 29.5" x 42" x 20.5" Mid: 29.5" x 42" x 19.25" Opened: 29.5" x 99.25" x 19.25"

19th C 3 Part Mahogany Dining Table . 111 1/2" L 47 3/4" D 28 1/2" H ALL DESCRIPTIONS AND ANY CONDITION STATEMENT GIVEN BY LANGSTON AUCTION GALLERY ARE STRICTLY OPINIONS AND LANGSTON'S SHALL HAVE NO R

A solid mahogany Duncan Phyfe period 3 part mahogany dining table with splayed legs with carved knees and brass paw feet. Each section has brass U shaped clips to connect. Each section is 34 in long (

3 part Hepplewhite dining room table, George III style late 18th Century dining table with 2 demi lune tables & center, with 2 leaves, table is 71" long without the 2 leaves, each leaf is 23.5" wide,

A fine American Federal period Three (3) part mahogany dining room table in the manner of Duncan Phyfe. Fine brass paw feet and acanthus carving. Dimensions: 99" X 47" X 30" and Two (2) leaves 22", 17

Impressive 3 part banded burl mahogany dining room/banquet table with (2) 22" leaves, has veneer loss on sides, top has minimal wear, book match grain approx. 121" w x 48" d x 30" h Opens to 165" w

3 part straight leg Chippendale mahogany dining table. 107" long x 48" wide x 29" tall.

Rhode Island, 1770-1785, center of a three-part dining table. 27-3/4"h x 43-3/4"w x 17-1/4"d Property from the Estate of Ralph & Roberta Carpenter.

Benchmade Mahogany Bell Flower Inlaid 2 Part Dining Table . 105" L 48" D 30 1/4" H "ALL DESCRIPTIONS AND ANY CONDITION STATEMENT GIVEN BY LANGSTON AUCTION GALLERY ARE STRICTLY OPINIONS AND LANGSTON'S

probably American, early 19th century, mahogany with pine secondary, center section with two drop leaves, 28-1/2 x 49-3/4 x 117 in.  Â

C1890 MAHOG 2 PART DINING TABLE 5' DIAM W/ BAND INLAY MADE UP OF 2 DEMILUNE TABLES W/ 3 LEAVES AND 10 CHAIRS

In 3 parts with 2 leaves, rich mahogany with reeded top edge, 3 sturdy pedestals with reeded downslope legs on brass paw caster feet, 28.5” H x 48”Dx 9’7” L with 2 leaves added

Regency Mahogany Two-Part Dining Table, Early 19th C. Dimensions: 28 3/4" H x 53 1/2" W, without leaves 54" L Property from the Estate of Carter Bales (1938 - 2019), Centre Island NY (CABA478)(MS)

20th C. comprising demi-lune tables, with a central drop leaf table. Overall: 29-3/4"h x 5'6"w x 4'4"d, each drop leaf 20"w

20th C. comprising demi-lune tables, with a central drop leaf table. Overall: 29-3/4"h x 5'6"w x 4'4"d, each drop leaf 20"w

ANTIQUE 2 PART BUTTERNUT DINING TABLE WITH A BANDED TOP AND FLUTED BALUSTER LEGS. 60 3/4 INCH DIA. 29 1/2 INCHES HIGH.