KINGSBURY FIRE STATION ONLY.

Kingsbury pressed steel fire station and fire pumper, with painted cast iron driver, station - 10'' h., 13'' d.

C. 1920's. All original to include the doors, but when wound, does not appear to work. Condition: (Good). Dimensions: 19 - 1/2" x 10" x 8 - 3/4".

1722. KINGSBURY FIRE ENGINE & FIRE STATION | FIRE STATION 11" l.

Kingsbury pressed steel clockwork Fire Station 8 fire house, 10'' h., 13'' l.

Kinsbury wind-up pressed steel Fire Station No. 8. [New Hampshire: Kingsbury, ca. 1900s]. Painted pressed steel fire station with wind-up mechanism (when wound, the station bell rings, and the doors s

Apparently unsigned. Dimensions: H 18" x W 9.5" x D 4.5" Condition: Not tested; mechanism not professionally inspected. A few chips to wood veneer; metal with patina, pitting and finish losses. Wear c

Nice original pressed steel truck. Has real decent paint. truck has working dual cylinders on the pump. Still has original hoses. Comes with original pull handle. A scarce truck. 22" Very Good-Excelle

Painted pressed steel with white rubber tires, 23” long. It has aged replacement hoses, with balance of toy intact and all original. It shows light to moderate playwear. Great Toy! From the Clint Mi

c. 1911, open service frame, contains seated driver, vertical boiler, steam dome & pump, cast iron spoke wheels, clockwork mechanism, bell on underside, housed in red tin station with mechanical openi

painted pressed steel, Little Jim, model 322, manufactured by Kingsbury for JC Penney, ca 1929, w/hose basket, orig ladders, decals minor wear, windup working, C5-6.

Vintage Gamewell Fire Station Ticker Tape Register & Take Up Reel. Very good condition and complete but we do not know if it works. Approx. 40 inches long.

Original front doors. Nice litho sides to station. Top and rear of station have been repainted. Vehicles are all original and includes one wind-up fire pumper and one wind-up fire truck with driver an

(Disneyland, 2004) A beautiful first edition scale model of Disneyland's City Hall and Fire Station from Main Street. This model was created by renowned miniaturist Robert Olszewski for his very popul

contains MF 1A2, 9C3, 14C3, 59B3, 9C3, orig boxes & set box minor wear, C8-9.

Different variations of similar ladder vehicle. All have original wooden ladders and cast-iron drivers. Two vehicles are missing steering wheel and one has a replacement steering wheel. One version wi

Robert Olszewski (American, b.1945) Limited edition scale model of City Hall and Fire Station from the Disneyland Main Street USA Collection. The model has lighted elements that are powered, and inclu

(Disneyland, 2004) A beautiful first edition scale model of Disneyland's City Hall and Fire Station from Main Street. This model was created by renowned miniaturist Robert Olszewski for his very popul

365. KINGSBURY FIRE LADDER TRUCK | All Original Condition. | 19" l.

MF/A2 Fire Station, some glue stain marks along edges, w/vehicles 59B3, 9C3, 14C3, 9C3, orig boxes minor wear, C7-9.

1330. KINGSBURY FIRE CHEMICAL TRUCK | 14" l. | Overpaint to hood, tires are replaced, otherwise in (Very Good to Excellent Condition) | $300 - $600

Lot consists of three different sizes of similar Fire Pumper: first is the largest one, with iron driver, mechanism on bottom, original driver, missing steering wheel, made of wood and metal; second,

Wind up engine ejects from the alarmed fire house when the doors open. Well done light gauge pressed steel. Firehouse is 13 1/4 x 8 1/2 x 10 inches. Excellent, tires dry cracking on engine.\r\n

Antique fire station doll house with double doors. Extremely well made. 21" wide, 27" tall, 23" deep.

1597. KINGSBURY FIRE ENGINE & AERIAL LADDER | LADDER 9.5" l.