Lathe

Cherry Roll Top Watch Makers Lathe Bench. Cherry roll top bench with 4 drawers, a single door and open compartment below, used condition and overcoated finish; measures 50 in. high x 28.25 in. wide x

A Watchmakers Brass and Steel Mandrel Lathe and Gear Cutting Machine, 19th Century, Each unsigned. Mandrel Lathe: H: 6 1/2 x W: 18 x D: 7 in. Gear Cutter: H: 9 1/2 x W: 12 1/2 x D: 7 1/2 in. From the

No shipping ! Comes apart in approx 6 pieces. Bring help to take apart and remove. NO SHIPPING

This has an approx. 8" Swing

W.F. Barnes & John Barnes Co. No.4 Metal Lathe, approx. 34"x39"x44"H ---BUYER TO ARRANGE SHIPPING

American. 1920. Cast mounts with plated steel parts. Stamped, "Dalton New York U.S.A". 16 x 36 x 12". Mechanically functioning. CODE:TOOL

Louis Levin & Son, Santa Fe Springs, Ca., a watchmakers 8mm lathe with accessories, including a cross slide, milling attachment, tip over T rest, filing rest, collet holding tailstock, motor, backshaf

A turn of the century Boley & Leinen 6mm watchmaker's lathe. Steel body with Brass fittings, numerous attachments include a 6-jaw chuck, fixed and feeding tailstocks, center rest, sliding table, small

G. Boley, Germany, a nice plain bearing Geneva pattern lathe with box and accessories, including plain and lever feed collet holding tailstocks, 50 collets including wheel and ring chucks, offset driv

F.W. Derbyshire, Waltham, Mass., a good "Model 750" lathe with accessories, cast iron bed with 10 mm ball bearing headstock and lever feed 10mm collet holding tailstock, compound slide rest, tip over

A large lathe with associated tools.

A 19TH CENTURY CAST BRASS AND STEEL WATCHMAKER'S LAITHE together with parts 51cm overall

Schaublin machining tools, watchmaker's tools for lathe, slide on pieces. Good condition.

An 8mm watchmakers lathe with 74 collets, the lathe unmarked, with tip over tool rest and tailstock, mounted to a Borel mount with motor, together with a Boley box containing 74 collets by Boley, Wolf

Belt-Driven Metalworking Lathe, c. 1930 Precision machine tool, suitable for smaller workshops, including bed, carriage with cross-slide, headstock and tailstock, 25 2/5 in. wide. With numerous access

This Unimatt lathe is the model SL DB200 with one auto feed lathe bed, two manual feed lathe beds, and one lathe bed for duplication. There are two individual motor sets (cast metal not plastic); spar

Lathe is approx 59" total length. Cabinet is approx 18" x 72" x 33". No shipping ! Buyer to bring proper help / equipment to load !

Jeweler's - Watchmaker’s Lathe On Walnut Stand. Unsigned, lathe with various attachments, mounted on a custom walnut base, in nice condition. 9.25 in. high x 17.5 in. wide x 11 in. deep. Weight: 18.

Bowl. A tall oval shape signed ( Philip Moulthrop American 1947 - ) and numbered PCM Philip Moulthrop "Wild Cherry" Prunos Serotina 720070 on base. From an East 72nd St NYC estate. - Dimensions: 11.5"

DESCRIPTION: 19th century clock makers bench lathe on wooden base. Appears unmarked. MEASUREMENTS: 12" x 6" x 10".CONDITION: Appears complete and in working condition. Minor wear to surface consistent

A lot of watchmakers 8mm lathe tools and attachments, including an unmarked milling attachment, a Wolf Jahn cross slide, a shop made dividing attachment and steady rest, a T rest, and assorted cutters

Great PEERLESS Jewelers Lathe by Watch Craft motor. C&E Marshall Co, Chicago, complete working lathe with some accessories. "SEE PHOTO'S''. Reversible motor (via switch on the back) that works real

DESCRIPTION: 19th century clock makers lathe on wooden base. Brass with wooden knobs. Appear unmarked. MEASUREMENTS: 18" x 10" x 9-5/8". CONDITION: Appears complete in working condition. Minor scratch

Metal bench top lathe. Getting all pictured. No shipping