PAUL EVANS Important steel Patchwork sculpture

Important Sculpture Front Steel Metal Cabinet, Unsigned, Attributed to Paul Evans. Welded and patinated steel, brass, and colored pigments, gold leaf, 2 section slate inset top panels. Size: 29.5 inch

1970's copper and steel patchwork ice bucket by Paul Evans, unsigned, with plastic insert, 11”H x 10” sq. .

PAUL EVANS (1931 - 1987);PAUL EVANS STUDIO;Important Pierced cabinet, New Hope, PA, ca. 1963; Torch-cut, welded, and polychromed steel, cleft slate; Unmarked; 37 1/2" x 72" x 22";Provenance: Original

PHIL POWELL (1919 - 2008);PAUL EVANS;Important wall-hanging bar cabinet with Paul Evans hardware, New Hope, PA, ca. 1962; Chip-carved and honed walnut, gilt wood, bronzed steel; Unmarked; 16 1/2" x 53

Paul Evans (1931-1987) , Patchwork Chair. Exceptional and rare signed swivel chair with hand welded bronze, copper and steel patchwork. Cream tufted upholstery.Paul R. Evans II, known as Paul Evans, w

Paul Evans (American, 1931-1987) for Directional Furniture, USA. Cityscape console table or writing desk in a chromed steel patchwork design, circa 1970s. Waterfall design with two drawers that can be

A painted steel modern wall sculpture in the manner of Paul Evans. Ht: 21.5" Wd: 25.5"

In the manner of Paul Evans (American, 1931-1987), mixed steels and iron, deep relief sculptural, patchwork, two-door sideboard with blue interior, polychromed details. 34" H x 97 1/4" W x 19 1/2" L.

Paul Evans Brutalist Modern 'Patchwork' coffe table or side table with base in steel, copper and bronze patchwork, with square slate top, circa 1970. 16.25" H x 22.5" Square.

Paul Evans Brutalist Modern 'Patchwork' side or coffee table with base in steel, copper and bronze patchwork, with square glass top, circa 1970. 16.75" H x 24" W x 28" D.

Large PAUL EVANS Original Brutalist Copper Book Ends. Patchwork Copper with Steel Rivets. Purchased from Artist at Paul Evans Studio-- Dimensions: H: 6 inches: W: 6 inches: D: 6 inches ---

Paul Evans, American (1931-1987). Lidded brutalist box of patchwork patinated bronze, copper, steel over wood interior, bottom is covered in felt. Measures 4.5"L x 4.5"W x 6"H. Condition: good conditi

Paul Evans Coffee Table, Paul Evans Studio for Directional. Patchwork coffee table. Patinated copper, steel and brass. 58w x 32d x 16h.

Stunning potted metal plant made of torch cut welded steel very much in the Paul Evans style.This beautiful sculpture stands 5 feet 9 inches tall and is 42 inches wide.The sculpture is planted on an a

Paul Evans (1931-1987) for Paul Evans Studio, distributed by C.C. Design Inc. Patchwork box USA, 1960s patinated copper, steel, brass distributor's stamp to base 4 1/2"sq x 5 3/8"h

Pair of "Patchwork" stools. hammered and distressed bronze, copper, and steel, with original upholstery. Original Paul Evans Plumsteadville labels.

Paul Evans, U.S. (1931-1987). Patchwork cabinet model PE-302 by Paul Evans Studio for Directional. Small sideboard of patinated copper, steel & brass with a slate top, 2 doors, right side has one shel

Paul Evans for Directional Furniture patchwork bar cabinet on casters. 'PE 32'. Welded steel, copper and brass with a slate top and resting on casters. Original invoice from 1968 is included. 42" W x

Vintage from the 1970s Materials: velvet, stainless steel, metal Overall width: 50 inches Overall height: 27 inches Overall depth: 44 inches Seat height: 19 inches Vintage Brutalist Paul Evans Sty

Paul Evans(1931-1987) Patchwork Cabinet, USA, 1967 Signed "Paul Evans 67" on left side. Copper, Bronze, Pewter, enameled steel, cleft slate top. Approx. Measurements: 30 1/2 in. H x 42 in. W x 21 in.

Paul Evans (1931-1987) for Paul Evans Studio / Directional Patchwork occasional table, model PE 31 USA, circa 1970 enameled and patinated copper, brass and steel, slate, plywood unmarked 29 3/4"sq x 2

Patchwork Side Table, model PE-31, in enameled and patinated copper, brass and steel over plywood with an inset cleft slate top by Paul Evans for Directional Furniture, American 1970s. This table is o

Paul Evans Patchwork coffee table Paul Evans Studio for DirectionalUSA, c. 1970patinated copper, steel and pewter, slate 16 h x 58 w x 32 d in (41 x 147 x 81 cm) Literature:

PAUL EVANS (1931 - 1987) DIRECTIONAL Custom Patchwork console table and mirror, USA, 1970s Copper, bronze, pewter, enameled steel, cleft slate Unmarked Console table: 30 1/2" x 60" x 13", mirror: 30"