Antique Ship Builders Half Model of a Sloop

Boat half model. This is an architects builders model for a sailing sloop. Quite nice with eight lifts. Mounted to a wood board. 9 lbs. 8"H x 6"W x 34"D.

TWO MOUNTED BUILDER’S HALF HULL MODELS19th Century1) Sloop built up in nine lifts. Applied skeg and rudder. Backboard 7.75” x 25.5”.2) Ship built up in eight lifts. Inscribed on back

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

Vintage Ship Builder's Half Hull Model, "Lettie S. Reed", mounted on board, depicting a two masted ship with brass name plaque, "Lettie S. Reed, Built 1866 East Boothbay, 50 Ton, 66 Feet" 18 in. x 26

A ship builder's half-block model of a New York steamer Early 20th century The pinewood model painted black above the waterline, with details including lifeboats on davits, in mirror backed glass disp

Antique half ship model diorama, carved and painted wood and string, unsigned, 14-3/4" x 25-3/4" x 2-1/2", good condition

Antique half ship model diorama, carved and painted wood and string, unsigned, 18" x 28-3/4" x 2-3/4", good condition, one loose piece

Antique half ship model diorama, carved and painted wood and string, unsigned, 13-3/4" x 23-1/2" x 2-3/8", good condition, 2 small loose pieces

Antique stepped builder’s ship model, 32.5 inches long, identified on reverse, "Model of a vessel built by Samuel Latham," 275th anniversary, Medford Mass.

Fine antique laminated half model of a sailing sloop with five lifts, cockpit at stern, stubbed mast, rudder, etc. Fine patina, mounted to original backboard

MOUNTED BUILDER'S HALF HULL MODEL OF A SHOAL DRAFT SLOOPAmerica, Late 19th CenturyHull built up in eleven lifts of alternating yellow pine and mahogany. Mounted on a later white-painted backboard.Back

(Lot of 3) Victorian builder's half-block ship models, 19th century, inscribed 'T. Hubble & Co., Ship No. 21', 'O.T. Stanley & Co., Ship No. 12' and 'R.O. Robins & Co., Ship No. 11', each 5"h x 16"l

Half-Hull Ship Builder’s Model, New Bedford Whaler, 19th century. Length 49"

DESCRIPTION: A ship builders model featuring the "Flying Fish" designed and built by Donald McKay in east Boston (1851) Displayed in a light wood and acrylic case with mounted nameplate. CIRCA: 1851 O

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

Contemporary Boat Maker's Half Hull Model, "Ship No. 18, length 175 ft, Tons 1,802, Geo. Maycock & Co Ship Builders, Leith 1853". Overall 42.5 in. x 9 in. Dimensions Overall 42.5 in. x 9 in.

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and

BUILDER'S HALF HULL MODEL OF A COASTAL PACKET SHIP19th CenturyBuilt up in eight lifts. Stained a mahogany color. Height 9”. Length 57”. Depth 6.75”.

lot of 2 antique boat maker's half hull ship models mounted on mahog plaques - 10"x22" & 6 1/2"x22"

Old wood half-hull model of a tanker with specifications drawn on ship such as "Oil Separator Lighter" and Built 1941 JS Watson Shipbuilders, Alcock and Ashdown Bombay. Size: 30 x 6 inches.

BUILDER’S HALF HULL MODEL OF A MOTOR VESSELEarly 20th CenturyBuilder’s markings on exterior of hull. Marked on top “Ships’ No’s. 471 + 472”.7” x 46”.

Builders half-hull bark model, mounted and dated 1860. Reverse with ink inscription of ship's name, makers name, date and other writing. Overall size 15 x 64

M/V Miller Freeman Fisheries Research Vessel Hull 879 with Coast Guard letter and plaque. Good overall condition with some light edge wear. Includes bolts for mounting. Measures at 60" x 11 1/2" x 7"