Bing Stationary Steam Engine & Dynamo

Earl example with fancy tile floor mounted to 16.5 X 7.5” wood base. Includes burner, dynamo with switch & night. Base shows some staining in center, otherwise presents well. Very Good.

Nice early example dampfmaschine with tin tile floor mounted on 11 X 9.5” wood base. It includes its burner and scarce filler cup, just missing the streetlamp whistle. It would benefit from a cleani

circa 1925, complete engine, Base 12" x 6 1/2" x 13" h.

Bertoia BASICS Online: BING STATIONARY #130/272 LOCOMOBILE STEAM ENGINE circa 1912 Base 10" x 5" x 12" h.

Bing, Ship Steam Engine with Dynamo + Lamp No 130/523, Germany pw, paint d. on tiled floor, otherwise good condition

Bertoia BASICS Online: BING #13675 LOCO OVERTYPE STATIONARY STEAM ENGINE circa 1902, burnished engine, boiler, wooden base, beveled firebox, water level glass, whistle, pressure valve, speed control,

2 Bing Steam Engines, c. 1930 Bing Werke, Nuremberg. 1) Stationary steam engine, brass boiler, length 10 5/8 in., fixed cylinder, 2 flywheels, cast-iron base, heavily restored, untested. (4/-) - And:

Circa 1912 Bing Company, German lying steam engine toy model 130/383. With wooden base with printed tiles 46,5 x 51,5cm. With steam whistle, weight safety valve, steam dome, dynamo and valve control,

American. 1900s. Cast iron, brass, copper. Used as a salesman sample. Maker unknown. 8.5" x 10" x 6".

Large Stationary Steam Engine by Doll, c. 1935 Nuremberg, no. 520/4, fixed cylinder, length of the boiler 12 ¼ in., Ø 4 in., boiler support, 2 boiler galleries with stairs and railings, two

A MODEL VERTICAL OVERHEAD CRANK STATIONARY STEAM ENGINE, 20TH CENTURY, the heavily cast and machined 6-spoke flywheel fitted to one end of the overhead crankshaft, supported by a pierced cast plate an

Large stationary steam engine model hand built and mounted into a wood box display. Apparently unmarked. Approximate height 9.5", width 15.6", depth 9".

Stationary Steam Engine by Doll, c. 1927 Nuremberg, no. 510/3, fixed cylinder, length of the boiler 11 in., Ø 3 1/2 in., 2 boiler galleries with railings, with water level gauge, safety valve, st

Has a great look, cylinder is free and wheel spins freely, has oiler, shows some wear and paint loss, displays well, not marked, mounted on a slab of wood, heavy, 17.75"x25", rated 8

This cool steam engine is from Bing toys and is hard to find. It has a brass plate on front with DR Patent No. 94623,dating it 1896. It comes with the Ferris wheel that has four ride buckets with pass

Circa 1904, German Bing Company lying steam engine toy "Vanna", model number 13676/2 with wooden base and colored tin tiles, steam whistle, safety valve, water level indicator, 3 flame burner, gallery

This is a very cool rarer c1935 Marklin stationary steam engine. It is model 4097/6 and appears complete and original WITH ORIGINAL BURNER AND FUNNEL. 15" tall x 12" x 12". Tried to test it and it's m

11". One gauge

Unusual form on embossed litho support mounted to cast iron base, 9 X 5.5:. Shine brass boiler with burner and screened stash. This will polish nicely. Excellent.

Doll et Cie German Toy Steam Engine. Worn from use. Dusty. Missing stack.

litho tin, 15 in tall, base is 12 in square, ca 1947, C6.

Turn of the century Bing Steam Engine. 11" x 12" base.

Bing Steam Engine No. 130/31, c. 1911 Gebrüder Bing, Nuremberg, Germany. Oscillating cylinder, brass boiler, safety valve, steam whistle, lacquered cast-metal base, complete with burner, overall

BING steam engine, lying boiler, surface area, sheet metal, lithographed, mounted on a wood base, 23.5x27.5 cm, boiler with a diameter of: 5.5 cm, with burner, water level glass, pipe, feed pump, tech