c1935 Marklin Stationary Steam Engine, Model 4097/6

This is a very cool rarer c1935 Marklin stationary steam engine. It is model 4097/6 and appears complete and original WITH ORIGINAL BURNER AND FUNNEL. 15" tall x 12" x 12". Tried to test it and it's m

Vintage German Made Stationary Model Steam Engine, by Marklin, with rectangular Marklin metal plaque affixed to side, set on a lacquered metal base, 15" high, 4 3/4" sq. As is, missing parts and burne

Large stationary steam engine model hand built and mounted into a wood box display. Apparently unmarked. Approximate height 9.5", width 15.6", depth 9".

MäRKLIN steam engine model, with dynamo and feed pump, lying boiler, surface area 35x34 cm, burner, water level glass, manometer, pipe, regulator of centrifugal force, funnel, boiler diameter: 8 cm,

MÄRKLIN steam engine drive model, butter barrel, height: 11 cm, good condition German Description MÄRKLIN Dampfmaschinen-Antriebsmodell, Butterfass, H: 11 cm, guter Zust.

Marklin a.o., steam engine, drive models + accessories, Germany pw, defects, for tinkerer, please inspect

Dimensions: 5.5" H x 6.5" W Shipping is the buyer's responsibility! We recommend obtaining a quote from a third party shipper prior to bidding

Vintage Steam Engine, with double wheels and red stack, with burner, unmarked, set on a rectangular beveled edge wooden base, 11 1/2" high, 10 1/4" x 4 3/4". As is, one wheel loose and metal stem deta

20TH C. TIN TOYS - LOT OF THREE Tin plate toys, circa 20th century, includes: Mamod stationary model steam engine with brass tank Model Greyhound Lines Scenicruiser, made in Japan 

ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY BEAM MODEL STEAM ENGINE, design of Watts parallel motion, cast-iron base with raised lettering "STUART" and impressed "80083", brass and steel, pai

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, vertical form of a

An early 20th century German Marklin No.4098/92/8 tinplate stationary steam engine with Marklin Germany label, instruction booklet, and alternator, together with a Mamod SE1a s stationary steam engine

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL V10 MODEL STEAM ENGINE AND FEED WATER PUMP,cast-iron, steel, and brass, base fitted with two tabs for securing base and some po

A steam mill engine stationary model by PM Research. Bronze & Iron casting Mill with twin cylinders.

A MODEL UNDERTYPE STATIONARY HORIZONTAL STEAM ENGINE, ENGLISH, DATED 1894, with metal plaque engraved F. LAWRANCE 1894,the single cylinder with eccentric driven slide valve, the valve chest with maker

A MODEL VERTICAL OVERHEAD CRANK STATIONARY STEAM ENGINE, 20TH CENTURY, the heavily cast and machined 6-spoke flywheel fitted to one end of the overhead crankshaft, supported by a pierced cast plate an

Marklin, steam engine 4097/6, W.-Germany, 30x30 cm, min. paint d., otherwise good condition

Large Working Model of a Stationary Twin-Cylinder Undertype Steam Engine, c. 1975 Extremely detailed model, brass, steel and cast-iron parts, partly finished in green, coal-fired, soldered brass flame

Convertible Steam Engine "Märklin (402)", c. 1919 For use as a horizontal or vertical stationary steam engine or as a steam tractor (no wheels included). With double-action cylinder, steam whistle a

"Märklin No. 401" Convertible Steam Engine, c. 1930 For use as a horizontal or vertical stationary steam engine, with steam whistle, fixed cylinder Ø ½ in., boiler Ø 2 in., flywheel Ø 2 1/8 in.,

110. MARKLIN HORIZONTAL STEAM ENGINE #4096 | circa 1935, firebox two hole model, complete engine, burner and 11" stack, lever pressure valve, in line oiler, governor and drive band, speed control, wat

Märklin Steam Engine and More, 1930 onwards 1) Märklin no. 4095/5, 10 ¾ x 10 ¾ in., complete with all fittings and burner. – 2) Working model Fleischmann windmill. – And: 3) Spare parts by E

Tin Steam Engine Ship Model, with working engine, possibly Marklin, with wooden stand, circa 1910 {Dimensions 24 x 40 x 9 inches}

Model hand built steam engine with live stationary twin piston drum engine Drive belt present but needs to be replaced. 6"H x 7 3/4"W x 7 1/2"D