EARLY CLIPPER SHIP HALF MODEL

Nineteenth century Clipper Ship Half Model with carved hull, three masts, carved figurehead, and capstan. Mounted to a wood backboard. Brass hanging tabs. Weight is 6 pounds.35" x 10" x 3"

Folk Art Clipper Ship "N. Light" Shadow Box, early 20th Century, depicting a carved half model of the fully rigged 3-mast ship "N. Light", with 29 carved wood sails, in molded cherry frame. Overall He

EARLY 20TH CENTURY CLIPPER SHIP MODEL 19" HIGH 26" LONG

In glass case. Early hand made clipper ship model Noach. case 36 inches x 26 inches x 15 inches. Model in original condition. Rigging good, green paint original. Patina looks good and even figurehead

MOUNTED HALF HULL MODEL OF THE CLIPPER SHIP "FLYING CLOUD"20th CenturyModel with black painted hull, a red bottom, and a carved figurehead and trailboard. Vessel identification painted on ba

SHADOW BOX MODEL OF A CLIPPER SHIPAmerica, Early 20th CenturyThe clipper ship, under full sail, with carved wood sails, rigging and other details, set in a plaster sea with other boats and launches in

Half hull model of a clipper ship, 16" x 29" x 3 3/4"

EARLY HAND MADE MODEL OF CLIPPER SHIP IN OLD PAINT 30"

MOUNTED HALF HULL MODEL OF THE CALIFORNIA CLIPPER SHIP “TWILIGHT”19th CenturyPine model. Backboard with notched corners.Backboard 10” x 28”. Provenance:Purchased from a descend

A ship builder's half-block model of a New York steamer Early 20th century The pinewood model painted black above the waterline, with details including lifeboats on davits, in mirror backed glass disp

MOUNTED PRESENTATION HALF HULL MODEL OF THE STEEL SCREW TUG "ROMAN"Early 20th CenturyShip built and engineered by J.P. Rennoldson & Sons. Black hull with salmon bottom. Presentation plaque affixed to

Wood half-hull model of three-masted ship, likely a clipper. Unidentified. Bowsprit end and stubby masts are built in. The boards are alternating dark brown and natural. The hull is mounted to a plywo

CASED MODEL OF THE CLIPPER SHIP "WHITE CLOUD" OF BOSTONLate 19th/Early 20th CenturyCase height 24.5". Length 30". Width 12.5".

Hand Painted Wooden Half Hull Ship Model. Back Marked: "Bambino." As Mounted Approximately 21.0L x 5.5H x 4.625D in.

Half Hull Wooden Ship Model. Marked: "210." Approximately 29.375L x 4.75H x 4.125D in.

Hand Painted Half Hull Ship Model. Marked: "Cook." As Mounted Approximately 21.0L x 5.5H x 4.5D in.

Hand Painted Half Hull Wooden Ship Model. As Mounted Approximately 33.5L x 8.25H x 5.0D in.

AMERICAN HALF-HULL SHIP MODEL, laminated pine mounted on a pine board with applied molding. Old refinished surface with warm color. Late 19th/early 20th century. 11 1/2" x 55 3/4".Provenance: Property

Ship model and base, early 19th C., three mast sailboat, "Clipper ship - Red Jacket", painted wood with string and rope accessories, four dinghies on ships deck, accompanied by wooden nameplate which

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

An early 20th century miniature model of the Flying Cloud clipper ship. This was crafted in the 1930's by Raymond W. Buffington of Swansea, Massachusetts. Measures 10" x 7", in wooden case 13" x 9 1/4

Ye Half Moon ; Condition: no stand; possibly top of weather vane; scattered dents and folds; heavily oxidized; 34 inches wide; 12 1/2 inches deep; 33 inches high

BUILDER’S HALF HULL MODEL OF A MOTOR VESSELEarly 20th CenturyBuilder’s markings on exterior of hull. Marked on top “Ships’ No’s. 471 + 472”.7” x 46”.

Highest quality model of the American clipper ship "Flying Cloud". Planked deck with expertly executed cabins, hatches, skylights, etc... Hull is copper sheathed below the waterline and painted black