ERNEST PLANK OVERTYPE STEAM ENGINE

Bertoia BASICS Online: ERNEST PLANK OVERTYPE STEAM ENGINE circa 1930 Base 6" x 3 1/2" x 8" h.

Bertoia BASICS Online: ERNEST PLANK SHIPS STEAM ENGINE circa 1920 Base 9" x 7' x 7".

Twin cylinder overtype; smallest in the model 502 series of three; cast iron firebox with 3 vents. Original brick type stack. Fairly elaborate with ladders and platforms, twin flywheels, etc. Conditio

Working Model of a Stationary Single-Cylinder Overtype Steam Engine, c. 1960 Extremely detailed engineering model, brass, steel and cast iron, gas-fired, brass boiler, 7/8 in. cylinder, attached chimn

Ernst Plank steam engine with separate four-wheel transmission, both retaining original maker's plate and are mounted on wood bases, engine outfitted with a governor, 10'' h., 7'' w.

Includes original wooden box marked 1 only 4F steam engine, with label on one end. Original box is missing top sliding piece. Engine itself is horizontal with original red stack. Condition: (Excellent

ERNST PLANK steam engine with ferris wheel, around 1900, drive model, mounted on a wooden board, board 39 x 14 cm, used, scratches on the paintwork, without burner German Description ERNST PLANK Dampf

steam powered flywheel with governor on wood base in original box with colorful paper label; housing retains makers' brass plaque engine on base 5.25" w. x 8.5" t. x 5" d.

Nice original condition but needs cleaning; burner missing. Condition: (Very Good - Excellent). Dimensions: 12" x 5" x 12 - 3/4".

Bertoia BASICS Online: J F JOS FALK OVERTYPE STEAM ENGINE circa 1925 Base 10" x 5" x 14" h.

Steam toys (4), Plank Steam Engine, Pre c.1934, D.R.P. No137178 & D.R.P.188563 on side shaft, Good cond w/missing safety valve, burner & stack, Plank Grinder/Polisher, c.1930, light chip on rim of gri

Impressive working model of a double cylinder overtype steam engine, mounted on a checkerboard decorated base, with two ladders that give access to open catwalk, a fully functional governor, pressure

Weeden Eureka No. 32 model overtype steam engine star ventilating cutouts in the boiler jacket, include a site glass, safety valve and old stage whistle, not tested. 15 x 7 3/4 x 4 1/2''

Plank, Steam Engine, Germany pw, on wooden socle, C 2

Has good color, shows wear and paint loss throughout, dual chamber, top pipe has been resoldered, displays well, marked D.R.G.M. 193033, 14x9.75x10.75", rated 7.75

Ernst Plank Cosmos steam engine, in its original box, 13'' h., 4 1/2'' w.

Circa 1910 Ernst Plank Vertical Steam Engine. All original with EP nameplate. Comes with Wilesco Machine Shop Accessory that has hammer, grinder, and saw. Steam Engine measures 11" Tall. Very Good-Exc

All original. Wheel has breaks. 14" Very Good

Very hard to find early 20th century Ernst Plank electric steam engine. All tin construction with 7" by 7" base. 11" tall to top of chimney. Has general wear, and some dings to boiler. Includes origin

Bertoia BASICS Online: WILESCO OVERTYPE LOCOMOBILE STEAM ENGINE circa 1960's Base 8" x 6" x 10" h.

circa 1935, features Bing firebox, Fleischmann raised piston assembly, and 9" stack. Base 10" x 9" x 7".

Bertoia BASICS Online: BING #13675 LOCO OVERTYPE STATIONARY STEAM ENGINE circa 1902, burnished engine, boiler, wooden base, beveled firebox, water level glass, whistle, pressure valve, speed control,

Jensen No. 35 Overtype Electric Steam Engine. cord cut.

4 Toy Steam Engines 1) Ernst Plank, horizontal steam engine with dynamo, boiler heavily modified, with additional manual feed pump, converted to gas heating, without chimney, dimensions of the basepla