LOCOMOTIVE BELL.

The brass or bronze bell with red interior and measuring 12 7/8 inches at the widest point is suspended in an iron yoke and cradle on circular base with iron crank and acorn finial at the top, unmarke

Boston & Maine Railroad steam Locomotive Bell #3237. This bell has an additional stamping of 1449? It's 144x. This 144x lettering is larger than the standard Boston & Maine stamping of 3237. B&M #144x

Very nice early brass locomotive bell. Matching brass finial. Cast iron cradle and yolk made by Howard. Interior repainted red. Condition (Excellent). Size 19 -1/2" T.

A 16" cast bronze steam locomotive bell mounted in a very heavy cast iron yoke with a hex nut finial. There appears to be provisions for an air ringer on the lever side. Clapper is intact. Bell shows

A bronze locomotive bell from Boston & Maine Railroad #2658. This bell was sold by the Boston & Maine in 19xx. We have the original B&M reclamation tag sting the weight of 242 pounds and the original

DESCRIPTION: Large Howard steam locomotive bell. Brass bell with cast iron yoke and crank. Embossed with "Howard" to top and bottom of yoke. Howard produced bells for steam engines form 1840 onward. F

Illinois Central Railroad Steam Locomotive Bell - Possibly from a 2-8-2 Illinois Central Railroad Steam Locomotive Bell. The bell has ICRR M-C cast into the top of the bell along with 04074. The numbe

Canadian. 1930s. Cast bronze bell on painted cast hardware. Marked, "16L171", in casting mark on harp. 12" x 16" Dia. From the William Robert Wilson Collection.

A large and heavy steam locomotive bell. It has a 17" diameter and it measures 12" high with a total height of 14" to the top of the mounting fitting. The cast iron yoke measures 17" bottom to top whe

From NYC #F4696 K-3Q, Pacific 4-6-2. Made by Brooks Works. American Locomotive company in 1924. Excellent polished example. 22" tall x 14" bell diameter

Solid piece, no markings, red painted bell interior, 25 inches tall, 16 inch bell diameter, no shipping due to weight Line Item # 67

A 19th century Bronze Locomotive Bell with Cast Iron base and frame. Stamped marks on Bell include "1883,1888, 1898" and others, frame is cast #80140. Old painted finish with wear. 14 1/2" diameter be

Very nice early brass locomotive bell. Cradle and yolk made by Howard. Interior repainted red. Condition (Excellent). Size 21 -1/2" T.

2877 cast at the crest of the yoke. Clapper is intact. Bell has two steps machined near the wide opening, 1890's style. This is not a standard shippable item and will require 3rd party shipping or pic

Cast Iron Locomotive Bell and Base. 20829 on base. Bell is 16" across and 13" tall, overall 24" wide and 22" tall

Locomotive Bell 26"H x 25"L x 15" Diam.

Cast Brass Steam Locomotive Bell. Circa 1890. Along with a cast iron Yoke mount. Bearing illegible numbers. Along with the number 6678 on the bell.. Condition- Rust on Yoke Verdegris finish on bell. 1

14 1/2" Diameter Brass steam locomotive bell. The bell is polished brass with a repainted red interior. Equipped with a Trans Devices ringer. The bell itself is otherwise unmarked. The yolk has 12 V S

A heavy little bel with 12" diameter. It also stands 9" on the bell height. With the yoke it measures 25" tall. It mounts flat (not a curved boiler). It is probably from a gas car or electric locomoti

Older steam locomotive bell with 2 concentric rings on the bottom edge. The cast Iron yoke has some casting marks that are hard to read. This bell does not have any shop stamps. Including the rolling

I am not sure which locomotive this little bell is from but it is from the Alan Thomas collection and his wife can’t remember which locomotive it's from. It has no markings. Certainly not a lar

Diameter measures 13" x 23" tall

Cast iron frame and yoke. Unmarked. The bell diameter is 14". The height is 20"

12" diameter x 18.5" tall with cast yoke and acorn finial