RAILROAD SWITCH STAND POSITION INDICATOR.

A bracket mounted on a steel plate containing a switch position indicator, with a spiked top accommodation for mounting an oil switch lamp. The lamp is a Dressel with one red lens and one blue lens wi

A bracket mounted on a steel plate containing a switch position indicator, with a spiked top accommodation for mounting an oil switch lamp. The lamp is a Handlan with two green lenses and day targets

A bracket mounted on a steel plate containing a switch position indicator, with a spiked top accommodation for mounting an oil switch lamp. Unit shows recent paint and has been restored. This is not a

Union Switch & Signal Railroad ES-20 Switch Position Indicator Measures 15 1/2" wide by 10 1/2" tall. Includes amber and red aspects. All lenses intact and wiring and sockets are present and complete.

Union Switch & Signal Railroad ES-20 Switch Position Indicator Measures 15 1/2" wide by 10 1/2" tall. Includes amber and green aspects. Both mounting ears on the base are broken and one lens is cracke

A Hayes Derail Operating Stand with Philadelphia & Reading four-lens signal lamp and target. WT RR padlock. 37in tall x 22-1/2in wide.

A large, cast iron, folding lever switch stand with a round red day target mounted on a square pole. The unit shows old black paint and is in good condition. There are some casting pattern numbers cas

A Hayes cast iron railroad switch with target and four-way Pennsylvania Railroad signal light. 35in tall x 25in wide.

A Weir railroad ground throw switch stand having a target and four-lens Adlake lantern. 36in tall x 36in wide.

Adlake railroad switch stand marker lamp, electrified for modern use, 11" (height) x 10" (length)

Body has been restored with new paint and reflector. Bottom is cast with R 1152 R 1. Indicator presents nicely.

Two Bethlehem Steel iron railroad switch stands, one with target. Each is 32-1/2in x 14in.

Restored New York Central Railroad derail switch stand which has been sand blasted and repainted. The top has been equipped with an Adams & Westlake switch lamp with red and yellow day targets. All to

NO SHIPPING AVAILABLE, unknown set completion, rusting and paint chipping throughout, measures 97 x 27 x 12 1/2 inches

Made by GRS, these early units show solenoids and post terminals, but no wiring intact. Complete with housing. One unit is missing the glass spectacle. Condition: (Fair). Dimensions: Each: 5 - 3/4" x

Lot of railroad switch track indicator signs. CONDITION: Fair, some broken reflectors.

Four unbroken lenses, two amber, 2 green. Each lens covered by "narrow vision shroud." No fount or wick. Marked for P.E. Co. Shipping: After your invoice is paid, our Shipping Department will contact

This is a excellent Pennsylvania Railroad Adlake Non-Sweating switch stand lantern. The lantern is complete, with the correct Adlake fount and burner. Two amber (yellow) and 2 blue lenses with no crac

A large variety of Curtis HiRail O Gauge accessories in the original packages. There are 6 operating switch stands and 5 mounting tie kits. Operating action. For use with Ross and Gargraves switches.

Five (5) Curtis HiRail O gauge switch stands in the original packages. Operating action, paperwork. For use with Ross and Gargraves switches.

Four (4) Curtis HiRail O gauge switch stands in the original packages. Operating action, paperwork. For use with Ross and Gargraves switches.

Acquired by Phil Birk directly from its original position in Lakeshore, Michigan. Measures 102.5 x 32 x 12 inches. We happily provide seamless in-house packing and shipping services on nearly everythi

Cast aluminum model of a harp style switch stand used on the Denver and Rio Grande Western. The model has D&RGWRY cast into the body of the stand. We are unsure of the age of this piece. Measures 19"

Railroad Signal Lantern, embossed Gray-Boston, metal w/textured red/blue glass lenses, unique base for attaching lamp to a square switch stand post, Exc cond, 13"H.