Description
English Stoneware Pottery Redware Stoneware Engine Turned Coffee Pot,
Staffordshire,
Circa 1765
A Staffordshire redware stoneware coffeepot and cover with an engine-turned body and cover. The cover with an acorn finial. The mouth of the spout in the form of a bird's mouth and to the base of the spout are leaves to either side.
Mark: Impressed pseudo-Chinese chop mark.
Dimensions: 9 3/4 inches high x 8 1/2 inches x 5 inches deep (24.77cm high x 21.59cm x 12.7cm)
Reference:
See a glazed redware example at the Chipstone Foundation where the inspiration for the shape is discussed (https://tinyurl.com/4aa8h9xa)-
The Early Renaissance Florentine architect Giuliano da Sangallo (c.1443-1516) is generally credited with the earliest consistent use of balusters in Europe. His designs influenced others, including Michelangelo (1475-1564), who modified the earlier baluster design to create the familiar vasiform shape that is narrow on top and swells at the bottom. The form became a ubiquitous motif in the eighteenth century, appearing in architecture, silver holloware, and turned furniture elements.[1] It also informed the design of many eighteenth-century ceramic vessels, including coffeepots. The design had practical advantages. Besides increasing the vessel's capacity, the baluster shape also provided physical stability to the vessel"”an important consideration when serving a hot beverage.
After about 1760, red earthenware copies of baluster-shaped silver coffeepots proliferated. With the increased use of engine-turning lathes in the pottery industry by the late 1760s, it became possible to add incised surface patterns in nearly unlimited variations, thereby broadening the market for fine red earthenware vessels. The body of this coffeepot was turned on a wheel, allowed to dry, then placed on the oscillating headstock of an engine-turning lathe. The repeat motion of a multi-bladed tool cut bands of wavy and zigzag parallel lines into the body. These geometric patterns were an explicit break from the decorative vocabulary of Chinoiserie that had dominated English pottery since Chinese porcelains were first imported in the seventeenth century and with the Rococo style. The comparative restraint of this decoration signals the beginnings of a more widespread interest in linear ornament, which was to become a hallmark of the emerging Neoclassical style.
(Ref: NY10356-nrrr)
Condition:
Alterations: Original Condition Unaltered
Imperfections: Some Imperfections
Condition Notes: Good condition- no repairs
Origin:
United Kingdom
Materials & Techniques:
Pottery, Stoneware
International: No International Shipping for this auction.
Combined shipping: Please ask about combined shipping for multiple lots before bidding.
Staffordshire,
Circa 1765
A Staffordshire redware stoneware coffeepot and cover with an engine-turned body and cover. The cover with an acorn finial. The mouth of the spout in the form of a bird's mouth and to the base of the spout are leaves to either side.
Mark: Impressed pseudo-Chinese chop mark.
Dimensions: 9 3/4 inches high x 8 1/2 inches x 5 inches deep (24.77cm high x 21.59cm x 12.7cm)
Reference:
See a glazed redware example at the Chipstone Foundation where the inspiration for the shape is discussed (https://tinyurl.com/4aa8h9xa)-
The Early Renaissance Florentine architect Giuliano da Sangallo (c.1443-1516) is generally credited with the earliest consistent use of balusters in Europe. His designs influenced others, including Michelangelo (1475-1564), who modified the earlier baluster design to create the familiar vasiform shape that is narrow on top and swells at the bottom. The form became a ubiquitous motif in the eighteenth century, appearing in architecture, silver holloware, and turned furniture elements.[1] It also informed the design of many eighteenth-century ceramic vessels, including coffeepots. The design had practical advantages. Besides increasing the vessel's capacity, the baluster shape also provided physical stability to the vessel"”an important consideration when serving a hot beverage.
After about 1760, red earthenware copies of baluster-shaped silver coffeepots proliferated. With the increased use of engine-turning lathes in the pottery industry by the late 1760s, it became possible to add incised surface patterns in nearly unlimited variations, thereby broadening the market for fine red earthenware vessels. The body of this coffeepot was turned on a wheel, allowed to dry, then placed on the oscillating headstock of an engine-turning lathe. The repeat motion of a multi-bladed tool cut bands of wavy and zigzag parallel lines into the body. These geometric patterns were an explicit break from the decorative vocabulary of Chinoiserie that had dominated English pottery since Chinese porcelains were first imported in the seventeenth century and with the Rococo style. The comparative restraint of this decoration signals the beginnings of a more widespread interest in linear ornament, which was to become a hallmark of the emerging Neoclassical style.
(Ref: NY10356-nrrr)
Condition:
Alterations: Original Condition Unaltered
Imperfections: Some Imperfections
Condition Notes: Good condition- no repairs
Origin:
United Kingdom
Materials & Techniques:
Pottery, Stoneware
International: No International Shipping for this auction.
Combined shipping: Please ask about combined shipping for multiple lots before bidding.
Condition
Original Condition Unaltered; Some Imperfections; Good condition- no repairs
Buyer's Premium
20%
Dimensions
9.75 x 8.5 x 5 in
English Stoneware Pottery Redware Engine Turned Coffee Pot
Estimate $1,380-$4,130
Starting Price
$950
2 bidders are watching this item
LiveAuctioneers Purchase Protection
Vetted auction houses
Secure, online bidding
Returns guaranteed for misrepresented listings
Dedicated support when you need it
The Collector's Edit II
Jul 31, 2026, 7:00 PM EDTNew York, NY, United States
TOP


































