Classic Smith & Wesson Fourth Model revolver chambered in .38 S&W, serial number 193040, retaining the majority of its original nickel finish with honest signs of carrying, handling, and use appropriate to its age. The 4-inch barrel has a reflective bore with defined rifling, although pitting is present. The original Smith & Wesson rubber grips appear complete and remain in excellent condition, while the screws show relatively little deformation. Peening is visible on the frame beneath the cylinder. Mechanically, the double-action mechanism will cycle but does not reset properly, while the single-action sear appears worn and will either fail to hold or push off with very little pressure. This revolver should not be fired in its present condition and requires inspection and repair by a competent professional gunsmith before use.
Smith & Wessons early top-break revolvers represent an important chapter in the companys development of compact defensive handguns. Chambered in .38 S&W, revolvers of this general pattern combined a hinged-frame action with automatic extraction, allowing the cylinder to be emptied rapidly when the action was opened. Surviving examples retaining substantial original nickel finish and complete period rubber grips offer considerable collector interest, and this example presents as a worthwhile preservation or restoration project despite its mechanical issues.
Caliber: .38 S&W
Barrel Length: 4 inches
Bore Condition: Reflective bore with defined rifling; pitting present.
Finish Condition: Retains most of its original nickel finish with expected signs of carry, handling, and age; frame shows peening beneath the cylinder.
Mechanical Condition: Requires repair; double action cycles but does not reset, and the single-action sear will not reliably hold and may push off easily. Professional gunsmith inspection and repair required before use.
Please review all photographs carefully, as they are an important part of the description and condition assessment prior to bidding.
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #1 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING. UNTIL FURTHER NOTICE, NO SALES TO COLORADO WILL BE ALLOWED GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!
Make: Smith & Wesson
Model: Fourth model
Serial # - Firearms: 193040
Caliber: 38 S&W
Barrel Length: 4"
- Make: Smith & Wesson
- Model: Fourth model
- Serial # - Firearms: 193040
- Caliber: 38 S&W
- Barrel Length: 4"























![[ANTIQUE FIREARMS] Smith & Wesson .38 Double Action 2nd Model Top Break Revolver: .38 CF. 3.25" barrel. SN: 34032. Nickel plated finish with blued triggerguard and latch, casehardened hammer and trigger, and mounting checkered hardrubber Smith & Wesson monogram grips. Doub](https://p1.liveauctioneers.com/7226/433097/241910430_1_x.jpg?height=181&quality=70&sharpen=true&version=1790276676&width=181)

![[C&R FIREARMS] Smith & Wesson .38 Safety Hammerless 4th Model Revolver Retailed by Cox & Son in: .38 S&W. 3.25" barrel. SN: 176920. Nickel plated finish with blued small parts and casehardened trigger mounting checkered hardrubber Smith & Wesson monogram grips with patent dates. Doub](https://p1.liveauctioneers.com/7226/433097/241910489_1_x.jpg?height=181&quality=70&sharpen=true&version=1790276676&width=181)