General Electric Induction Motor & Fan

No shipping ! Bring proper help and equipment to remove

With GE badge on the guard, iron base, yoke arms with wingnuts, pancake motor with nice casting and outside posts, four brass windmill blades, S-type guard, signed with a metal plate on the motor, ser

Antique / Vintage motor. Does not include dolly

A General Electric fan dating back to 1901-1902 with a black body and brass blades. Info plate on motor housing reads "Alternating Current Fan Motor, No. 609572, 110 Volts". General Electric logo on c

Great General Electric collar oscillator electric fan With brass blades. Appears to have a new cord but not wired to motor. Does not run. Fan cage is 13 in in diameter height is approximately 17 in.

Metal oscillating fan. Four(4) brass blades. Model No.563684. Alternating Current Motor; 18in.H. x 12.5in.D.(fan cage)Working condition

Late 19th - Early 20th c. General Electric Fan, sn 946115, volts 110, cycles 60, three speeds, with brass blades and cage, alternating current motor, original cloth cord, 17" diam., 20 3/4" high. Need

With GE badge on the guard, iron base, yoke arms, the motor with outside posts, four brass blades, S-type guard, signed with a metal plate on the motor, serial number 265216, patent dated 1901. Measur

Early rotating fan manufactured by General Electric Company. Nice I.D. tag, four brass blades, good wire cage, looks to be complete, cord needs replacing, has base switch, motor is free but not tested

An Art Deco fan with a brown finish and gold-pinstriping, signed on the base and again with a GE badge on the back of the motor, three overlapping 'quiet' blades, non-oscillating. Measures 10 inches b

with gold metal blades and a molded plastic base with raised General Electric; the encasement: 12 inches diameter; the base: 6 inches diameter

brass blades and cage, 15 1/2" high early 20th century

Number 1017199, height 15 inches, untested, sold as is.

Delta with General Electric Motor Belter jigsaw

Vintage General Electric fan. This vintage, metal fan is much more stylish than its modern counterparts. This fan has lots of interesting details like the vintage General Electric logo in the center a

Vintage General Electric Fan. N.P. 132545 - No. AK - Spec. 273113-1. Pin (Wing Nut) that holds the fan into position on the base is stripped and the fan will not stay upright without it. Runs and has

VINTAGE GENERAL ELECTRIC FAN - GOOD WORKING ORDER WHEN TESTED (SEE PHOTOS) - CORD IS BRITTLE AND NEEDS TO BE REPLACED

Unrestored original General Electric 12" four blade fan. Black body with brass fan blades. Untested The original wiring has been cut off. Three speeds with adjustable tilt base. A ideal restoration pr

Works when plugged in.

17" tall. Works [MSP 340]

Oscillating fan measures 14"w x 16"h.

Vintage 1930's to 1940's General Electric Fan made out of heavy weight metal with a dull silver finish and art deco lines Industrial Type Look MCM weighs 15 pounds 17in H x 16in W Wear is evident from

No shipping

Needs a new cord.