HANS EICHENBERGER FOR STENDIG DINING TABLE

With "Stendig" label underneath. Mid-century dining table with wooden top and steel base. Dimensions: H 28.5" x W 80" x D 44" Condition: Oxidation to base. Heavy finish wear. Wear consistent with age

Lot 207 Hans Eichenberger for Stendig Marble Side Table thick round white marble top over flat-bar chromed steel base height: 21 1/4 inches diameter: 23 3/4 inches Additional Information: marble

Lot 171 Hans Eichenberger for Stendig Marble Side Table thick round white marble top over flat-bar chromed steel base tabletop (diameter): 20 inches height: 21 1/4 inches Additional Information: Item

Vintage Hans Eichenberger for Stendig white marble top side table with chromed metal lets. Measures approx. 21 3/8" height x 20" diameter at top. Some surface rust seen on metal. JD/B13

Hans Olsen dining table with 4 set in vinyl covered chairs. Dimensions - 29" x 41.5" chairs-28" x 21" x 16"

Hans Wegner dining table by Andreas Tuck. height 28 1/2 inches, top closed: 35" x 55", top open: 35" x 93"

Hans Wegner Teak, oak. Manufactured by Andreas Tuck, Denmark. Frame stamped with manufacturer's mark and 'Made in Denmark.' Fully extended: 94.5" wide

Hans Eichenberger for Stendig Walnut and Chrome 'Omega' Desk Unmarked. 28 1/4 in. x 6 ft. x 34 in. Collection of Bernice Rose. Property from the Collection of Bernice Rose

Teak dining table with two leaves by Hans Wegner, Denmark 1960s. With three 20" leaves. 28H x64W x37D inches.

Burled maple veneer top on chrome base, Made in Finland, retains original Stendig labels on underside. 29"h x 40"diameter top

Teak dining table with leaf by Hans Wegner for Andreas Tuck, Denmark 1950s. One 23.5 inch leaf. 28.5H x48W inches.

Teak. Has two 23 5/8" pull out leaves. 29 1/4" h x 59 1/8" w x 37 1/4" d.

Hans Bellmann dining table, model 1000 WohnbedarfSwitzerland, c. 1947laminate, lacquered wood, ash, chrome-plated steel61.75 w × 34.5 d × 28 h in (157 × 88 × 71 cm)

Wegner, Hans for Johannes Hansen, Oval Dining Table, style number 567, branded Johannes Hansen mark on base, oak, recently refinished, 71 x 51 x 28 inches, extendable but does not include any accompan

A Pair of Hans Eichenberger for Stendig russet tufted leather and tubular metal frame chairs, 22 x 29 x 28.5 inches, paper label on base. Provenance: from the estate of Leon and Jane Arkus. Leon was t

Underside has tag which reads STENDIG MADE IN FINLAND. Piece is tan toned and wooden. Table has circular shaped top. Measures approx 48 inches wide 28 inches tall. dining table, kitchen table, stendig

A chrome plated steel and glass "Alpha" table by Hans Eichenberger for Strassle, Switzerland. 21 x 20 . All measurements are in inches.

Hans J. Wegner dining table Johannes HansenDenmark, c. 1960teak, stained oak, brass77 w x 41.5 d x 28 h in (196 x 105 x 71 cm) Signed with branded manufacturer's mark to underside: [Johanne

A Hans Wegner for Johannes Hansen extension dining table in teak, with an oval top over tapering legs, and with three 21-1/2 in leaves and one 12 in leaf. Branded mark for Johannes Hansen. Closed: 29H

JH-567 dining table by Hans Wegner for Johannes Hansen. Includes three leaves (double sided) and drop down center leg. Maker's burn mark on underside. Closed - 30 x 71 x 52.5 / Leaf - 25 . All measure

A Hans Wegner AT-304 teak dining table by Andreas Tuck with drop leaves. Stamped on bottom. Down - 28 x 51.5 x 34 / Open - 93.5 long . All measurements are in inches.

Hans J. Wegner Dining Table, model AT 314, Andreas Tuck, Denmark, 1960. Teak, brass. Closed - 72w x 41. 75d x 28h, Open - 119w x 41 3/4d x 28h. Provenance: George and Elizabeth Wile collection.

Hans J. Wegner Dining table, model no. AT-303, ca. 1960 Teak, beech, brass. Produced by Andreas Tuck, Denmark. Underside with producer's brand. 28.5" H x 63" W x 32" D

Hans Wegner Danish Modern Teak Dining Table, circa 1960, Hans Wegner for Andreas Tuck Dimensions: 28 3/4" H x 34" W x 63" L, includes 1 leaf 15 3/4" L (GOLD464)(MS)