Krauss & Mohr Overtype Steam Engine.

Steam toys (4), possible Krauss & Mohr Vertical Steam Engine, c.1900, unusual, appears all orig, VG cond, Krauss & Moore Mill w/Trip Hammers, c.1920, VG w/some repair, Krauss & Mohr Waterwheel/Trip &

Twin cylinder overtype; smallest in the model 502 series of three; cast iron firebox with 3 vents. Original brick type stack. Fairly elaborate with ladders and platforms, twin flywheels, etc. Conditio

Working Model of a Stationary Single-Cylinder Overtype Steam Engine, c. 1960 Extremely detailed engineering model, brass, steel and cast iron, gas-fired, brass boiler, 7/8 in. cylinder, attached chimn

Includes original wooden box marked 1 only 4F steam engine, with label on one end. Original box is missing top sliding piece. Engine itself is horizontal with original red stack. Condition: (Excellent

Nice original condition but needs cleaning; burner missing. Condition: (Very Good - Excellent). Dimensions: 12" x 5" x 12 - 3/4".

Bertoia BASICS Online: J F JOS FALK OVERTYPE STEAM ENGINE circa 1925 Base 10" x 5" x 14" h.

Bertoia BASICS Online: ERNEST PLANK OVERTYPE STEAM ENGINE circa 1930 Base 6" x 3 1/2" x 8" h.

Impressive working model of a double cylinder overtype steam engine, mounted on a checkerboard decorated base, with two ladders that give access to open catwalk, a fully functional governor, pressure

Weeden Eureka No. 32 model overtype steam engine star ventilating cutouts in the boiler jacket, include a site glass, safety valve and old stage whistle, not tested. 15 x 7 3/4 x 4 1/2''

Bertoia BASICS Online: WILESCO OVERTYPE LOCOMOBILE STEAM ENGINE circa 1960's Base 8" x 6" x 10" h.

circa 1935, features Bing firebox, Fleischmann raised piston assembly, and 9" stack. Base 10" x 9" x 7".

Bertoia BASICS Online: BING #13675 LOCO OVERTYPE STATIONARY STEAM ENGINE circa 1902, burnished engine, boiler, wooden base, beveled firebox, water level glass, whistle, pressure valve, speed control,

Jensen No. 35 Overtype Electric Steam Engine. cord cut.

Falk overtype single cylinder steam engine with a geared flywheel and water pump, 11'' h., 8'' w.

Well engineered model of an early over type vertical steam engine, first patented in 1797. They were typically used in collieries for any sort of power that was needed. Engine is mounted onto wood pla

Steam toys (3), Drill Press, Good cond w/paint loss, Bing Table Saw, c.1910, wonderful 4-color Bing logo on bottom of table, Exc cond & Falk Steam Engine Overtype, one flywheel w/rim damage, whistle h

Steam toys (3), Doll Mill-Water Wheel #703, c.1930, appears to be orig, needs cleaning, water wheel slightly bent, no duck, VG cond, Weeden Steam Engine Overtype 21, appears to be orig, missing weight

Mohr & Krauss tin lithograph tinsmith steam toy accessory, with hand cranked central motor drive on wood base, 5'' h., 10'' w., 4'' d. Pictured in Morton A. Hirschberg Steam Toys - A Symphony in Motio

24. TWO MOHR & KRAUSS SHOEMAKER STEAM TOYS | German, litho. | 5" h. | One chair is reglued to base, (Very Good to Excellent Condition) | $200 - $400

Mohr & Krauss painted and lithograph tin windmill tableau steam toy accessory, with a maiden at water trough surrounded by farm animals, 12'' h., 18'' w. Provenance: Morton A. Hirschberg Steam Toy Col

Steam toys (3), possibly Krauss & Mohr Windmill-Saw-Trip Hammer, c.1920, missing pear tree & flag, windmill blades not orig, Good cond, Krauss & Mohr Dredge & Windmill, 30% paint loss, gears worn but

One is marked Doll Company Made in Germany. Steam engine has red brick original stack. Looks to be moderate to heavy use. Larger lineshaft has weighted lever-operated clutch but with little paint on b

Miniature Working Model of a Walking Beam Steam Engine, c. 1850 Marked "W & S Jones, 30 Holborn, London", all-brass machine parts, Watt-type 6-column low-pressure balancing steam engine, vertical cyli

20"x42"x24" working model steam engine, has been sitting in a museum, has not been run in years, WOW! - - -BUYER TO ARRANGE SHIPPING