Small Hardware Bolt Cabinet

Large Revolving Hardware Bolt Cabinet. Original hardware, one pull missing otherwise very good condition. 24 1/2 X 39 X 24 1/2 inches.

Large Hexagon Hardware Bolt Cabinet. 80 drawers on rotating original 18 drawer base, all original hardware. Good original condition. 30 X 61 X 30 inches.

Cast Iron Hardware Bolt Display Cabinet. Good original condition. 24 inches tall X 17 inch diameter.

Galvanized metal drawers with wood fronts. 22 1/4 IN; wide 15 1/4 IN; deep 7 3/4 IN; tall.

Has heavy cast drawer pulls with great paint on drawer fronts. 8 1/2 in wide 5 1/2 in deep 10 1/4 in tall.

SMALL PAINT DECORATED HARDWARE CABINET 1900 AMERICAN WOOD 29" X 24" X 20. ALL ORIGINAL PAINT DECORATION AND PULLS. 7 DRAWERS WITH COMPARTMENTS AND 3 OPEN. VERY SOLID AND HEAVY. SOME TAGS INSIDE FOR HA

Hardware store revolving nut & bolt cabinet, oak octagon-shape, 80 pie-shaped drawers w/orig porcelain knobs & deeply pressed lettering, c.1890, Exc cond, 36"H x 21.5"Dia.

Hardware Store Revolving Nut & Bolt Cabinet, pine 120 drawer octagonal shape, Good+ cond w/remnants of orig stenciling, 52.5"H x 22"W.

Carpenter made with six columns of nine open shelves, circa 1920 in white pine wit nice dark patina, 15” diameter x 67” high. Condition leans a bit, else Fine.

Early country store hardware cabinet having 50 small drawers, some marked with sizes. 19th century. Very good condition. 21.5"L x 4"D x 23.5"H.

Awesome early Oak Country Store Hardware cabinet with 73 small dovetailed drawers on interior top, 7 are missing knobs. With faded graphics on one door and first long drawer on bottom has been added,

Wonderful country store bolt or hardware cabinet. Pine construction with all the pie-shaped drawers, rotating and in new varnish. CONDITION: Complete and showing age and great stenciled drawer fronts.

Cabinet is approx. 12"x 30" x 14" tall. Cabinet is really loose and falling apart. Getting everything in it

with key Condition: adapted for use as an entertainment cabinet; hardware replaced; refinished. A small loss to lower corner of one door. 67 inches wide; 23 inches deep; 80 inches high

An antique hardware store revolving nuts and bolts parts cabinet with an octagonal top, each side with ten numbered drawers on a square base with twelve drawers on two sides. White ceramic pulls. On c

Cado Wall Unit with 2 Bays: 1 Bay with shelves, glass sliding doors front cabinet, and storage cabinet; Walnut, made in Denmark, includes poles and necessary hardware; 1 Small Bay: Teak cabinet with g

Asian brass-mounted wood jewelry box, having character and etched hardware around the small cabinet with doors and storage drawers. [10" H x 7" W x 5" D]. Minor oxidation and wear; lacking door peg.

American Antique octagonal hardware store 72-drawer nuts and bolts revolving cabinet circa 1880 pine, porcelain 22 1/4"w x 21 7/8"d x 32 3/4"h

This is a beautiful old early hardware cabinet, possibly an older restoration. A rare version of your typical nut and bolt cabinet with a super early look. It has a swivel base and swivel octagon top

Galvanized metal drawers with wood fronts. Does have a small chip and crack in top trim, otherwise is solid and a great looking piece!! 50 1/2 IN; long 12 1/2 IN; deep 22 1/2 IN; tall.

China, 18th/19thC, well carved Zitan wood, decorated with plant motifs, birds and dragons, with two doors, interior with five drawers, lift-up top with compartment, gilt metal hardware. Small defects.

Hardware Store Display Cabinet, probably American Bolt and Screw Company, Dayton, Ohio, c. 1900. The upper case, which can be mounted to rotate, with ten stacked wedge-shaped drawers on each octagonal

A metal rotating counter top parts bin with multi-small compartments. Eight sided, all have advertising. Fair condition. 21-1/2" T X 12-1/2 " W

A metal parts cabinet that measures about 15" x 10" x 6". It has plastic drawers with various hobby parts: cut off disks, lubricants, small nuts/bolts, other various parts, 4 smaller top drawers are e