Windmill Weight "Hummer" Rooster, embossed "Hummer E

Windmill Weight "Hummer" Rooster, embossed "Hummer E 184", cast iron w/older painted finish, 8.75"H x 9.5"W.

ca 1900 cast iron Elgin Wind Power & Pump Co (Beatrice, NE) rooster form windmill weight embossed "Hummer E 184" in fine untouched worn orig red paint & lightly oxidized surfaces - in excellent orig c

Title: Rare Long Stem Rooster Windmill Weight Date: C 1900 Material: Cast Iron Dimensions: 10”H X 10”W X 1 1/2”D Dry original painted surfaces, embossed “HUMMER E 184”, proper right side. Ma

Elgin Wind Power and Pump Company rooster windmill weight with a ball-shaped base. The rooster weight would go on a 10 foot mill. Tail on the rooster reads “Hummer E 184”. Bottom half of the base

Title: Early Windmill Weight Date/Period: C 1900 Material: Cast Iron Dimension: 8 3/4”H X 9 1/4”W X 1 1/2”D Provenance:Authentic “HUMMER E 184” rooster windmill weight. Original painted surf

Hummer rooster windmill weight, featuring figural rooster design, painted body, marked "Hummer E 184", mounted on wooden base 12"h x 10"w x 4"d Condition: Previous repair to rooster comb, tail Prov

Hummer rooster windmill weight, marked "Hummer E 184" 12"h x 10"w x 4"d Condition: Previous repair to rooster comb, tail We happily provide seamless shipping services on everyth

LONG STEMMED ROOSTER - MODEL - RAISED LETTERING "HUMMER E 184" - MOUNTED ON CUSTOM STEEL BASE - SHOWN IN SIMPSON'S WINDMILL WEIGHTS, PG. 51, AND ALSO NIDEY'S WINDMILL WTS., #127

C. 1900 cast iron rooster windmill weight, original paint, Elgin Wind Power & Pump Co., Elgin Ill., marked "Hummer, E 184", comes with stand. Rooster 9" Ht..

Rooster Windmill Weight, Elgin Wind Power & Pump Co., Hummer # E 184, for 10 ft mill, cast iron, VG+ cond w/light oxidation, 9"H on later wood stand, 15"L.

Elgin Wind and Pump Co., Elgin, Illinois, early 20th century, cast iron. Short stem rooster with cast label "Hummer E184". Old red paint. 10.5"h.

Elgin Wind and Pump Co., Elgin, Illinois, early 20th century, cast iron. Short stem rooster with cast label "Hummer E184". Later white and orange paint. 9"h.

E184. 8 1/2" tall, 9 1/2" long. Was painted but has been stripped and is ready to be painted or displayed.

Hummer rooster windmill weight. 9 1/2" W., 9" Ht.

2 PC Lot of Hummer E184 Rooster Windmill Weights 10"H, 9"L

ELGIN WINDMILL COMPANY "E184 HUMMER" ROOSTER ATOP BALL BASE - MOUNTED ON CUSTOM STEEL STAND - PAGE 51, WINDMILL WEIGHTS BY SIMPSON - ALSO PICTURED IN COLOR IN WINDMILL TALES BOOK (RIGHT AFTER TITLE PA

17.5"x16"x3" in good condition, does have some rust pitting, has a small area of metal missing on the back side bottom corner, see photos.

9"x10", the cast iron rooster windmill weight has rust pitting, no damage.

rated 8.75, 11"T., the cast iron rooster windmill weight is in good condition, is mounted on a wood block

These cast-iron weights were used on windmills as counterbalances on the vane. Manufactured C. 1900 by the Elgin Wind and Pump Company, the Hummer E 184 was made for the Hummer Model L windmill. Size:

SHORT STEMMED ROOSTER - MARKED WITH RAISED CASTING MARK "HUMMER E184" - MOUNTED ON CUSTOM STEEL BASE - SHOWN IN SIMPSON'S WINDMILL WEIGHTS, PG. 50

Elgin Wind PUmp and Power Co., Elgin, Illinois, early 1900s, cast iron. "Hummer E184" made for Model L windmill. Old, worn red and white paint. Dent in one side. 10.5"h. 10"l. including base.

AMERICAN CAST-IRON FIGURAL WINDMILL WEIGHT, rooster form, embossed on one-side "10 FT No 2", and retains an old red- and white-painted surface, base with an old yellow-painted surface. Possibly Elgin

Cast iron "HUMMER" rooster mill weight. 1900's Nice vintage cast iron "HUMMER" mill weight in old red paint. Custom made wood stand for display. Please note that this lot has a confidential reserve. W