Frank Bower Half Hull Model "Elise", 1921

MOUNTED BUILDER’S HALF HULL MODEL OF THE STEAM/SAIL YACHT “RAMACE FERGUSON”Late 19th CenturyBuilt up in six visible lifts. Black hull with natural wood bottom. Identifying plaque on

A Nautical Half Hull Model 20th Century identified as the SS Cedartree / Built by John Crown & Sons Ltd - Sunderland / 1928 / For / The Tree Steamship Co Ltd / Howard - Jones Ltd Managers / Cardiff. h

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Large Half Hull model. "The Great Surgeon". Together with and early photograph of Dr. William H. Thorndike. Known as "The Great Surgeon" for whom the boat was named. Boston area, circa 1880. Condition

H E BOUCHER HALF HULL MODEL, BOAT MEASURES 55" LONG, ON MAHOGANY BOARD, STAMPED ON BACK, AS PICTURED, FROM BROOKLYN NEW YORK ESTATE

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b

ALDEN MOUNTED HALF HULL MODEL OF A COAST GUARD CUTTERFirst Half of the 20th CenturyBuilt up in five lifts. Hull with extensive builder's markings.Backboard 10" x 55".Provenance:Northeast

MOUNTED BUILDER’S HALF HULL MODEL OF A WORK BOAT20th CenturyBlack hull with green boot and red bottom. Plaque marked “‘S.T. Brahman’ & ‘Krooman’”.Mahogany bac

19th century, overall 50" long, 10" tall, 5" deep.

MOUNTED BUILDER'S HALF HULL MODEL19th CenturyHardwood model built up in fourteen lifts.Pine backboard 11.5" x 56.25".

MOUNTED BUILDER’S HALF HULL MODEL OF A CARGO VESSEL Early 20th Century Extensive builder’s markings on hull. Backboard 7.5” x 39”.

MOUNTED HALF HULL MODEL OF THE CLIPPER SHIP "FLYING CLOUD"20th CenturyModel with black painted hull, a red bottom, and a carved figurehead and trailboard. Vessel identification painted on ba

MOUNTED HALF HULL MODEL OF A YACHTFirst Half of the 20th CenturyWhite hull with green bottom. Incised arrow at upper hull.Backboard 10” x 55”.

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

A very good early 20th century half hull model of a freighter, showing precise hand drawn measurements for determining sheer & speed, mounted to an ebonized plaque. Hull dimensions: 64" long x 6" high

Half hull model mounted on wooden plaque. American, circa 1890. Condition: Excellent condition. L 48-1/4" W 12-5/8" D 6-1/4". Copy and paste link for high-res images: https://www.dropbox.com/sh/n0rzm2

MOUNTED HALF HULL MODEL OF A MOTOR YACHTFirst Quarter of the 20th CenturyModel with a green and red boot, and an applied brass propeller and rudder. Mahogany backboard.Backboard 10.5î x 33.25&#23

Large old carved and painted wood half-hull model of the RED JACKET built by George Thomas of Rockland, Maine. 65.6 x 15 x 5 in deep.

MOUNTED HALF HULL MODEL OF THE RACING YACHT "AMERICAN"Circa 1920Beautifully shaped with extreme overhang and deep keel. Tiger-grain mahogany surface above the waterline and painted green bel

MOUNTED HALF HULL MODEL OF THE SCHOONER "MARY B. DYER"America, 20th CenturyBy Tom D. Conlon. Built up in lifts. Bright-finished bottom and white-painted topsides. Detailed with trail board w

MOUNTED HALF HULL MODEL OF A STEAM-SAIL YACHTEarly 20th CenturyBlack hull with coral bottom. Carved sternboard and trailboards with gilt decoration.Backboard 10.25” x 54”.

Vintage carved and painted wood half-hull model of the CLIPPER INVINCIBLE built 1851 by WH Webb. 45 x 11 x 3.5 in deep.

MOUNTED HALF HULL MODEL OF A MOTOR LAUNCHFirst Quarter of the 20th CenturyApplied upper deck works, skeg and rudder.Mahogany backboard 6.5” x 38”.

Large vintage carved and painted wood half-hull model of the CAMBRIAN built by Green and Lowden of London in 1854. 57 in long x 13.5 x 3.5 in deep.