Erie T. Slaight Lock, Hopkins & Dickerson Key

Standard Switch lock and key both made by T. Slaight. This is the New York Lake Erie ^ Western Railroad before it became the Erie Railroad. Nice markings.

An early New York & Erie Railroad lock made by t. Slaight with the railroad initials stamped across the drop. This name pre-dates the New York Lake Erie & Western name.

.

A brass lock and key made for the New York & Erie Railroad. This is an early Erie name. This is one of the over-sized locks that is quite heavy. No maker and large initials stamped on the drop. It has

There must be a great story behind this lock & key set. You can see ghosting of TH&I RR cast in the drop. It clearly has ERIE stamped on the shackle. Both lock & key are Fraim products. My understandi

An earlier New York Lake Erie & Western Railroad switch key. Made by Thomas Slaight in Newark, New Jersey. Nice tapered barrel with the standard Erie switch bit. Dark color.

A lock & key pair from the Erie Railroad. The lock has a nice brass dust cover with ERIE RR casting. The lock has the Fraim "keystone" hallmark stamped on the shackle. The key has ERIE stamped on one

An Erie brass lock with ERR stamped on the face. It has 2 keys, one marked ERR "G Master 3A95999". The other key has an ornate Corbin, New Britain hallmark. The clevis on the lock is crushed on the si

3 Erie Railroad locks: (1) Corbin brass lock with ERIE stamped, operating key is not marked (2) Fraim made Freight House lock, ERIE FH stamped on the shackle, traces of old green paint (3) small Corbi

.

A group of 4 railroad locks with keys: (1) Erie with Diamond logo key (2) Lehigh Valley spelled out on shackle, unmarked key (3) Delaware Lackawanna & Western with Fraim Key (4) Delaware & Hudson

1 East Erie Commercial Railroad lock with key, 1 Chicago, St. Paul, Minneapolis, and Omaha Railroad lock with key

A lock & key pair from the Erie Railroad. The brass lock has an ERIE RR casting. The lock has the Fraim "keystone" hallmark. The key has ERIE stamped on one side and the Fraim "keystone" hallmark reve

Fraim made both this lock & key. The lock has ERIE cast in the panel on the reverse. The key is nicely stamped ERIE and has a Fraim "keystone" hall mark.

Erie Railroad Master Junior Lock w/ Key Brass bodied Corbin Master Jr. lock with Erie in the diamond logo cast into the front panel. Shackle stamped as hardened. Key is stamped Master Jr. with the Cor

This is a pair of Erie Railroad switch locks with brass keys. The first is a Fraim lock stamped ERIE, and comes with an Adlake key with the Erie diamond E logo stamped on it. The lock has a chain and

Erie Railroad Corbin Small Brass Signal Department Lock w/ Key Lock is stamped ERIE on the body as well as the key. Key is marked with the Corbin makers information on the reverse and does operate the

Erie Railroad cripple track lock and key set. The lock has ERIE RR cast into the drop. There is a faint "CT" stamped on the shackle. The key is a Fraim and clearly has the "CT" marking. For some reaso

Adlake Erie Railroad steel lock with Erie Diamond logo stamped on the front. 254 stamped to the right of the keyhole. Also included is a Slaymaker key with Erie RR on the front in serif font and the S

A pair of nice Erie Railroad brass Locks. They both have the Erie diamond logo. Also included is a Corbin key with ERR MASTER shop stamped.

Yale Pittsburgh & Lake Erie Railroad Brass Signal Dept. Lock w/ Repro Key The front of the lock body has the P. & L.E. R.R. cast into the body w/ Signal Dept. stamped around the lettering. The reverse

A nice Erie Railroad brass lock that accepts a flat key from the bottom. It's better than the pictures show. The logo is on one side and looks really good. Chain attached.

A large group of items from Maine. A Wilson Bohannan lock marked "C" with a T. Slaight tapered barrel key with MCRR and "C". This was the standard dog-leg bit used for box cars on the MEC. Also includ

A & B RR EARLY BRASS LOCK WITH KEY. MADE BY T. SLAIGHT, NEWARK, N.J. MEASURES 3" , NOT INCLUDING SWIVEL END.