An Edwardian scratchbuilt live steam wood model of river launch 'ENA',

circa 1920s; painted wood hull, with open working brass steam engine and aluminum bow cover, 21 in. L.

Scratch built live steam model of 4-2-2, 3 1/2 inch gauge 'The Lord of the Isles', 21cm (h) x 38cm (w) plus tender.

Great Western Railway Scratch-Built Live Steam Earlham Hall 7930 Locomotive and Tender Model, Great Britain, mid-20th century Marks: EARLHAM HALL, 7930; GREAT WESTERN, (Great Western coat-of-arms), G.

Steam Launch Model, Cased on Wood Base. Signed on lower corner of base. Case Dimensions: 3.75 x 6.75 x 3.75 in.

A live steam scale model of the Southern Railway 6900 locomotive and tender. 20th century. Locomotive with gauges and hook-ups for coal or wood-burning use in tender. Tender and locomotive attach with

Wooden model, large steam boiler and steam lines, heavy hull painted in white with natural color rim, features front windshield. 33" l.

Launch type cabin cruiser boat. Hull and cabin made of wood, fitting look to be brass as is original rudder. Marked "Boucher" inside on the motor parts. Comes with a homemade wooden stand. Looks to be

Cast iron live steam scale model beam engine, nicely detailed having a very good painted surface, with working governors and a faux wood encased boiler, 8 1/2'' h., 11 1/4'' w.

Wooden example, blue hull with natural wood deck, brass stack, cleats at deck, nice scale, comes with stand. 31" l.

Large live steam engine model with two flywheels, positive and negative connectors, marked on a wood display base. Apparently unmarked. Approximate height 10", width 13", depth 6".

Model Live Steam Engine with Flywheel. No marks. Approximately 18 inches long. Mounted on wood base. Dusty and oily.

Model Live Steam Engine with Flywheel. Only mark is "S". Mounted on wood. Dirty and oily. Approximately 6 inches long

Scratch built scale model constructed of cast iron, brass, and steel, intended to operate on livesteam and usually took years to build and finish, locomotive is 29.5" long, good to very good condition

Two live steam engine models. The Green oscillating type(height 3.5", width 3") along with a boiler type mounted on a wood stand (height 3.5", width 3.75"). Apparently unmarked.

Model of a steam launch boat realistically crafted in wood, painted on the outside, with a steam engine replica, striped awning and presented on a wood stand.Appx 30'' long and 12'' tall SHIPPING: In-

Circa 1890 carved and painted wood half hull model (laminated) with original surface. Small piece of wood backboard missing on end. Overall 43 in long x 9 x 5 d. Possibly a Fall River Steam passenger

3-Inch Live-Steam Model of a Wallis & Steevens Simplicity Roller, c. 1980 Coal-fired model of this unusual street roller by Wallis & Steevens of Basingstoke, England, with distinctive 5 1/3 in. diagon

135. BING LIVE STEAM RIVER BOAT | Very nice original paint for an early live steam ship, named "Louise" at sides. | 18" l. | Flags are replacements, aft deck has overpaint, rear cabin has minor resold

1210. RADIGUET LIVE STEAM LAUNCH | Live steam, hand painted in black and bronze typical of Radiguet's attractive vessels, features two wooden masts, horizontal boiler with oscillating cylinder driving

2-Inch Live-Steam Model of the Steam Roller "Victoria", c. 1970 Model of the 8-ton 'C' class roller built by Aveling & Porter Ltd of Rochester, Kent, coal-fired, with reversible two-gear transmission,

French - 1880 - 16" L Hand painted in black and copper, this boat is in fine condition. Complete with two wooden masts and a horizontal boiler. The stand is contemporary. Fine

A scale live steam model of a showman's traction engine, A scale live steam model of a showman's traction engine, 96cm long 40cm wide 57cm high Provenance: The Gordon Gridley Collection, London. Condi

1 1/2-Inch Scale Live-Steam Model of a Traction Engine by Allchin, c. 1975 Working model of the British Allchin "Royal Chester" single-cylinder engine, steel, cast-iron and brass construction, coal-fi

1 ½-Inch Scale Live-Steam Model of a Traction Engine Large working model of the British "Bert" traction engine, coal-fired, single-cylinder engine, Stephenson's slide-valve gear, two-speed gearbo