A BUILDER'S HALF-BLOCK MODEL FOR THE YACHT LADY MAUD,

MOUNTED BUILDER'S HALF HULL MODEL OF THE YACHT "LADY MAUD"20th CenturyBuilt up in eight lifts.7" x 37.75".

A ship builder's half-block model of a New York steamer Early 20th century The pinewood model painted black above the waterline, with details including lifeboats on davits, in mirror backed glass disp

(Lot of 3) Victorian builder's half-block ship models, 19th century, inscribed 'T. Hubble & Co., Ship No. 21', 'O.T. Stanley & Co., Ship No. 12' and 'R.O. Robins & Co., Ship No. 11', each 5"h x 16"l

MOUNTED BUILDER'S HALF HULL MODEL OF A SAILING YACHT Late 19th/Early 20th Century Built up in four lifts. Backboard 4.75" x 23.75".

MOUNTED BUILDER’S HALF HULL MODEL OF A MOTOR YACHT Late 19th Century Built up in six lifts. White hull with copper bottom. Backboard 4.25” x 32”.

MOUNTED BUILDER’S HALF HULL MODEL OF A MOTOR YACHTFirst Half of the 20th CenturyBuilt up in five lifts. Mounted on a newer mahogany backboard.Backboard 8.5” x 28”.

MOUNTED BUILDER’S HALF HULL MODEL OF A MOTOR YACHT, PROBABLY A LAUNCH Early 20th Century Built up in three lifts. Backboard 6.75” x 32.25”.

Painted half hull model of the yacht, "The Sheldrake". Lifts evident under paint. Designer: Winthrop L. Warner. Builder: Paul E. Luke. 1949. (Identified on engraved plaque). 12 x 36 3/4 inches (backbo

An early 20th century half block model of a salmon With original hand painted colours, and carved as swimming from left to right, 84cm long x 24.5cm high (33in long x 9 1/2in high) For further informa

Extremely rare shipyard builders half model of the United States Lighthouse Service Lighthouse Tender Juniper. Launched in 1939 just before the USLHS became The United States Coast Guard. The Juniper

EXTREMELY rare shipyard builders half model of the United States Lighthouse Service lighthouse tender JASMINE. Jasmine was built by the Dravo Contracting Company in Pittsburgh Pennsylvania in 1935. Th

Builders model of a Crosby Catboat. Laminated Pine half model. Nice shape, back is marked M. Crosby. The Crosby Family of Osterville Massachusetts are famous builders of catboats and other craft. 4x6x

Laminated pine mounted to mahogany which measures keel length. 34 1/2 x 10 1/2 x 6 inches.

Original shipyard builders half model of an American tugboat with varnished finish. Mounted to a wood backboard. The successful bidder will have the option of removing this item from the auction site

Builders half model of a lobster boat. The hull is built of eight lifts and is mounted to a backboard.

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b

MOUNTED BUILDER'S HALF HULL MODEL19th CenturyHardwood model built up in fourteen lifts.Pine backboard 11.5" x 56.25".

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

MOUNTED BUILDER'S HALF HULL MODEL OF THE COASTAL SCHOONER "MENHADEN"Late 19th CenturyHardwood model built up in seven lifts. Typewritten note verso refers to the Menhaden as being 184 feet l

BUILDER'S HALF HULL MODEL OF A STEAM-POWERED SAILING VESSELLast Half of the 19th CenturyBuilt up in nine lifts. Screw shaft molding at stern.Height 9.5". Length 50.5".Provenance:Hyde Park

MOUNTED BUILDER'S HALF HULL MODEL19th CenturyBuilt up in ten lifts.Mahogany backboard 10.25" x 53".

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and