BUDDY 'L' LOCOMOTIVE PILE DRIVER #1022

Quality pressed steel reproduction of the Buddy L Locomotive Pile Driver by T Reproductions. Could use some cleaning. 22", Excellent

713. BUDDY L PILE DRIVER ON TREADS | 19" l.

A contemporary T-Reproductions manufacture model. Condition: (Excellent) Item Dimensions: 27 - 1/2" x 11" x 15 - 1/4".

520. BUDDY L PILE DRIVER ON WHEELS | 24" l. | Reds possibly enhanced (Excellent to Pristine Condition) | $300 - $500

171. BUDDY L PILE DRIVER ON WHEELS | 22" h. | All Original Condition. | $300 - $600

Toy Buddy "L" Pile Driver Outdoor Railroad, Model 260, painted pressed steel, Exc restored cond w/minor paint chips, 22"H x 19.5"L.

Toy Buddy "L" Pile Driver Outdoor Railroad, Model 260, painted pressed steel, black housing frame w/red corrugated roof, four black wheels, hand wheel rotates cab on base, minor paint wear, o/wise an

289. BUDDY L PILE DRIVER ON WHEELS | 24" l. | Hammer piece is a wooden replacement, paint reflects OK under blacklight UV, though after closer examination is likely a very old overpaint. | $400 - $800

1443. BUDDY L PILE DRIVER ON WHEELS | 24" l. | Old overpaint, displays in (Very Good Condition) | $200 - $400

Vintage Buddy L Pile Driver. Original Paint. Heavy Steel Toy. Dimensions: 23" X 19" X 7"

468. BUDDY L PILE DRIVER ON WHEELS | 23" l. | (Very Good Condition) | $200 - $400

Buddy L Pile Driver Pressed Steel Toy - Offered Without Reserve - This is an original toy that would benefit from a full restoration. With virtually no original paint, it has a patina of surface rust

This vintage Buddy L pile driver has minor paint loss and moderate overall wear. Original. Condition (Very Good).

T-Repro Buddy L Pile Driver, in C7 plus.

168. BUDDY L RAILROAD PILE DRIVER | Roof needs reattachment to body, appears to be a Contemporary example, though unsure of manufacturer. | 28" l.

Two (2) large-scale metal toy vehicles to include a pressed steel Buddy L railroad pile driver car and another pressed steel steam shovel, possibly Keystone, circa 1920s height 13 in. x width 9 in. x

One of T-Reproductions working cars for the train series. Contemporary. Condition: (Excellent) Item Dimensions: 25" x 7 - 1/4" x 13 - 1/2".

Pressed steel, classic front runner of this Outdoor Railroad Series, this example is painted in black overall, silver highlights and brass rail, bell and whistle, an impressive size and condition, har

Buddy L Locomotive Wrecking Crane & Two Coke/Dirt Excavators by Poll Mfg. Co. Pressed Steel Toys - Offered Without Reserve - One of the most important Buddy L toys is the Locomotive Wrecking Crane. Th

SLIGHT BEND TO COW-CATCHER. EXCELLENT OVERALL CONDITION. 9 1/2" HIGH, 25 1/2" LONG, 7" WIDE. WITH TENDER, UNMARKED, POSSIBLY REPAINTED. 8" HIGH, 17 1/2" LONG, 6 1/2" WIDE. ALONG WITH 48" PIECE OF TRAC

Rarely seen large Buddy L locomotive and car. Is made of metal with some pitting but overall is still solid. Locomotive is Approximately 25 in Long 10 in tall 7 in wide, car is 17 in Long 8 in tall 61

Toy Buddy "L" locomotive Outdoor Railroad, marked 5344, painted pressed steel, one brass rod needs repair, o/wise Near-Mint cond, 40"L, comes w/1 section of newer track.

Toy Buddy "L" locomotive & tender Outdoor Railroad (2), locomotive 1401 Charlotte & tender-Southern RR, painted pressed steel, VG cond w/older restoration & pin-striping loss, comes w/1 section of ori

Complete and all original. There are some scratches and paint chips throughout. Cab lettering has been replaced. Tender has also been re-lettered. Both pieces need to be cleaned. Condition (Very Good)