Pennsylvania Railroad Kelly Brasstop Bellbottom Lantern

A standard 5 3/8" size globe lantern frame made by Kelly. It has a couple of minor splits ion the brass top. The lid is stamped PRR in simple lettering. The frame shows pitting. The bell is easily rem

A Kelly manufactured brass top bell bottom lantern with PRR stamped in the standard small block lettering on the lid. The brass top is in fine condition. The Kelly marking is near the vent holes on th

The frame top looks like a Kelly with the small PRR stamping on the shoulder. The bell is probably a Kelly with the PRR stamping on one side. This lantern was liberated by somebody who banged down the

A triple marked Pennsylvania Railroad lantern made by Kelly in Rochester, New York. The lid has the smaller standard Kelly PRR stamped. The brass top is free of dents and splits. The twist off bell ha

A brasstop bellbottom frame with PRR is huge block lettering on the lid. This frame is a looker. The bottom of the bell has a tiny solder drop in the center. The bell comes off easily. The globe is a

From a prominent collection, a very nice Troy & Boston brasstop bellbottom lantern. It has T&B RR stamped on the lid in smaller lettering. A prior owner scribbled Kelly on the bottom and I wouldn't di

A triple marked Pennsylvania Railroad lantern with block style PRR lettering stamped on the lid. The brass top is in fine shape. It has a twist off bell with PRR stamped in large block lettering. The

An Adams & Westlake bell bottom lantern with a bee-hive brass top. There is some even pitting to the frame and the brass top still looks fine. It has PRR stamped on the lid. It has a twist off bell. T

A Kelly Lamp Co. (not hallmarked) no. 39 single guard, chimney bail, brass-top bell bottom model embossed "PRR" on the lid reflector with "1119" stamped in. The chimney has some corrosion perforations

An Adams & Westlake bell bottom lantern with a twist off bell. The frame has the PRR fancy lettering stamped on the lid. The globe is a Kopp or MEG Co green cast without an extended base. The globe do

This is either a steam Gauge or Star Headlight frame. It has a nice clean brass top and DL&WRR stamped in the lid (Delaware Lackawanna & Western Railroad). The cage has some "Porter look to the base a

From a prominent collection, a Parmalee & Bonnell 6" brasstop bellbottom frame with twist off base. It has the 1871 patent date on the lid. The bail comes off the lid area and not through the vent. It

A Parmalee & Bonnell 6" brass top railroad lantern frame with skirted base and correct "dome" top fount. An older frame with the bail going through the vents so it pre-dates bail ears on the cage. A s

A Steam Gauge Lamp & Lantern frame with a 6" (really 5 7/8") size globe. The frame has a single piece with pinch pot. The brass top is fine. The Steam Gauge hallmark is the older method of a stamping

An Adams & Westlake bellbottom railroad lantern frame with a twist off bell. It has PRR stamped in fancy lettering on the lid. The very top has the Adams & Westlake information. It has a tin fount and

An Adams & Westlake bell bottom frame with removable bell. It has PRR stamped in the lid. The frame does have lots of pitting. The globe is a Corning with their Cnx hallmark. The PRR etching is in blo

Note that this was lot #221 in the April auction. I accepted it as a return because the collector who purchased it pointed out an obvious flaw in the description. The description should have stated th

An Adams & Westlake bell bottom lantern with a 2 pin sliding globe retaining assembly. The frame has the PRR fancy lettering stamped on the lid. The bell wobbles a little bit. I think there is a very

An Adams & Westlake bellbottom frame with the shoulder of the lid is stamped PRR in serifed lettering. It has a twist off bell and a brass burner. A klear-cote product was applied many years ago. The

Boston & Maine Railroad brass top, bellbottom lantern. A decent brasstop bellbottom frame with twist off bell. The brass top is nice. The frame shows some light surface rust. The lid has B&M RR stampe

The frame sure looks like a Railroad Signal Lamp & Lantern to me. It has the distinctive reverse curve vertical wires and bail ears that are also RR Sig. It has a twist off bell. The brass top is is v

A pair of brass top bell bottom frame railroad lanterns: (1) typically stamped with 1871 patent date on the lid (this one is not marked) with odd size globe and retainer. Thought to be Parmalee & Bonn

An unusual bellbottom Keystone Casey frame. This is not a common railroad lantern model. The metal is very nice. The lantern is 100% complete and all original. The bell is a twist off and it comes off

An Adams & Westlake bellbottom frame with a standard lid stamping of PRR in fancy lettering. It has a bee-hive style top with a retaining pin for the interanl globe spring. It has a twist off bell and