Pennsylvania Railroad Brasstop BB Kelly Lantern

A triple marked Pennsylvania Railroad lantern made by Kelly in Rochester, New York. The lid has the smaller standard Kelly PRR stamped. The brass top is free of dents and splits. The twist off bell ha

Note that this was lot #221 in the April auction. I accepted it as a return because the collector who purchased it pointed out an obvious flaw in the description. The description should have stated th

A standard 5 3/8" size globe lantern frame made by Kelly. It has a couple of minor splits ion the brass top. The lid is stamped PRR in simple lettering. The frame shows pitting. The bell is easily rem

A Kelly manufactured brass top bell bottom lantern with PRR stamped in the standard small block lettering on the lid. The brass top is in fine condition. The Kelly marking is near the vent holes on th

The frame top looks like a Kelly with the small PRR stamping on the shoulder. The bell is probably a Kelly with the PRR stamping on one side. This lantern was liberated by somebody who banged down the

From a prominent collection, a Boston & Albany Railroad frame made by Steam Gauge Lamp & Lantern. This model has a twist off bell. Some Steam Gauge frames have a pinch pot, like the Fitchburg elsewher

The frame sure looks like a Railroad Signal Lamp & Lantern to me. It has the distinctive reverse curve vertical wires and bail ears that are also RR Sig. It has a twist off bell. The brass top is is v

An unusual manufacturer for the Pennsy is this C. T. Ham bellbottom lantern frame with double vertical wires and a twist off bell with the standard Ham 1893 patent date. The frame is very clean. It ha

Pennsylvania Railroad lantern and lamp parts: Kelly (not marked Kelly) that fits a standard #39 extended base globe frame. Older because it has applied guides for the mount. One 3 7/8" large fount for

An unusual Kelly style fixed globe with PRR cut with the standard thin horizontal and wide verticals known to be used in Kelly lanterns. This is a taller version of the lantern design. We sold one 2 a

An Adams & Westlake bell bottom lantern with a bee-hive brass top. There is some even pitting to the frame and the brass top still looks fine. It has PRR stamped on the lid. It has a twist off bell. T

A brasstop bellbottom frame with PRR is huge block lettering on the lid. This frame is a looker. The bottom of the bell has a tiny solder drop in the center. The bell comes off easily. The globe is a

From a prominent collection, a very nice Troy & Boston brasstop bellbottom lantern. It has T&B RR stamped on the lid in smaller lettering. A prior owner scribbled Kelly on the bottom and I wouldn't di

A triple marked Pennsylvania Railroad lantern with block style PRR lettering stamped on the lid. The brass top is in fine shape. It has a twist off bell with PRR stamped in large block lettering. The

B&ARR clear embossed Kelly unguarded engine lantern. No visible hallmarks. Early bayonet fount with glass insert and pick-wick flat lard tube burner. Brass top has a few minor edge splits. Lantern is

A Kelly Lamp Co. (not hallmarked) no. 39 single guard, chimney bail, brass-top bell bottom model embossed "PRR" on the lid reflector with "1119" stamped in. The chimney has some corrosion perforations

This is a Railroad Signal Lamp & Lantern Company lantern frame. It has the light stamping in the brass top. It takes a stanard 5 3/8" globe. It's also a single piece frame that uses a pinch pot assemb

An Adams & Westlake bell bottom lantern frame with a twist off bell. It has PRR stamped in ornate lettering on the lid. The A&W information is on the top. The twist off bell has a standard tin fount a

A wonderful Adams & Westlake brass top bell bottom frame made for the Central Vermont Railroad. This frame features ice spikes on the bell so it is Vermont and not Cumberland Valley. The lid has a ver

This lantern has a nice Steam Gauge Lamp & Lantern stamped hallmark under the vent holes on the top. The lid is clearly stamped C&MRR in round lettering that is Steam Gauge " Syracuse all the way. It'

An Adams & Westlake lantern frame with a brass top and twist off bell. There is a small brass tag soldered under the vent holes and it has "F. RUSS". This is an employee. The bell has the New England

A standard Keystone "Casey" wire bottom frame with the 1903 patent date. The lid is clearly stamped PRR. The frame is pretty standard and it is above average in overall condition. The odd-ball wick ra

A Pennsylvania Deitz #39 Vulcan lantern frame that is pretty standard. This model has a bail lock-down clip on one side. The frame is clean and stamped PRR on the lid. The globe is a standard Corning

A standard Keystone "Casey" wire bottom frame with the 1903 patent date. The lid is clearly stamped PRR. The frame is pretty standard and it is above average in overall condition. The odd-ball wick ra