Sawasdi Tantisuk oil

Mid-century modernist Southeast Asian painting by Sawasdi Tantisuk (Thailand 1925-2009). Oil on thin masonite panel. Framed. Appears to be signed, indistinctly, inscribed into the paint while wet, low

Sawasdi Tantisuk Thai, 1925-2009 Floating Market Signed S. Tantisuk (lr) Oil on board 16 x 24 inches (40.6 x 61 cm) C The Estate of June Marston Dyson

Sawasdi Tantisuk (Thai, 1925-2009) "Figures on the River" oil on board signed lower left. Framed. 16" x 24", framed 20" x 28"

One of only 2 known examples of this rare and highly desirable Wayne Model 11 Air Meter with Water. This is currenly the only known unrestored example of this desirable Wayne Model 11 from 1920. It re

An excellent example of the early version Marathon Running Man sign. The colors on this sign are excellent with great gloss throughout. It has the maker's mark of Veribrite Signs - Chicago. One side i

rated 8.5, 12"D., SSP sign, has excellent gloss and color, field is clean, has chips at mounting holes.

This sign displays very well. It has a few chips in the field on both sides along with some areas of lower gloss and fading to the outer white color. The sign is rated an 8.25 on both sides. It measur

Humble Gasoline of Houston, TX Porcelain Sign marked Veribrite Signs - Chicago. This is a single sided porcelain sign in the original ring. It has been clear-coated. There are a few small chips and so

this is a very hard to find original 1908 Vanderbilt Cup Race Pennant, 33" x 16.5", it has some slight moth damage to the outer edges

A very uncommon early single-sided porcelain sign with fired-on litho tire graphics. It has some fading and wear to the field along with a few small chips in the field. The outer edge also has chips a

It has the Veribrite Signs - Chicago Maker's Mark. Both sides have very good color and gloss. There are some surface scratches and a few spots of hazing on both sides. Each side also has a few chips i

An excellent example of this early brown bell Pennzoil sign with an Ing-Rich maker's mark. Both sides have excellent color and gloss. It has 4 alignment holes along the bottom edge that have either be

in good condition with light dents near the bottom, and light scratches throughout, 9.5" x 6.5"

This desirable can remains full and unopened. It has great colorful graphics. Each side has a few light surface scratches to the upper field area. It is graded 8.5 on each side.

Large double sided porcelain sign and pole, sign is 72" diameter, pole and ring have been powdercoated white, arrows and ornate scrolls appear to be newer, this sign and pole needs more work to be ful

The display side is clean without any chips to the field and only a couple small chips on the outer edge. The display side has some slight fading to the red and a couple scuffs in the field. The rever

A very nicely restored uncommon Wayne 1-T with large curved ad glass. The pump plates and globe are officially licensed Mobil Oil reproductions. It lights up and displays great. It measures 80" tall i

It is marked Tenn Enamel Co 1933 and measures 60" x 45". It has a raised edge and has very good color and gloss. Overall is in excellent condition with only a few tiny chips in the field along

This is a double sided porcelain service station curb sign marked "Patented Oct. 12 1915". The display side has very good color and gloss with a few chips to the outer field. The reverse has some disc

6.5" x 3" x 5.5", w/ original mounting collar, marked R. Lalique on the right side and France on the left with embossed writing

missing bottom lid, in good condition with only light wear and scratches, 9.5" x 6.5"

This H-C sign has the original ring. There are some surface scratches and touched-up chips to both sides. It is marked Reg. US Pat Off and measures 72"

This is a beautiful sign with great graphics and colors. The condition is also excellent on both sides. There is one factory flaw area and a couple very minor edge nicks. It is marked "Made in U.S.A #

rated 8.75, 12"D., has excellent gloss and color, field is clean, has chips at top and bottom mounting holes