Sailor With Telescope Weathervane

A five-piece decorative arts grouping to include an as-is horse hollow body weathervane, a pair of brass push up candlesticks, a set of candle snuffer snips, and a brass telescope. Weathervane: 10in t

Carved in low relief and painted oval plaque signed and dated Leo L. Jones May 4, 1913. 11 x 5 inches. Together with a sailor weathervane. Height 12 1/2 inches.

Rare large size sheet iron weathervane of a man in a top hat holding telescope and pointing.

SHEET IRON SILHOUETTE WEATHERVANE OF A SEA CAPTAIN HOLDING A TELESCOPE, POINTING OUT TO SEA, 39 X 23

Mid 20th century. Cut out sheet metal silhouette of a sea captain with telescope. Thick green original paint is crazed with some flaking. 38.5"h.

Fine Copper Steeplechase Horse Weathervane, Massachusetts Maker unknown. Originally found in the Newport, RI area. 31 in. x 37 in. Note: A similar example of the above offered lot was sold at Sotheby'

A.L Jewell (1852-1867 Waltham, Mass.) Rare Centaur weathervane. Molded copper, zinc, and lead. Includes base. Retains an old historic surface with remnants of yellow paint and verdigris patina. Bullet

Exceptional "INDEX" Howard Horse Weathervane. J. Howard, Waltham, Mass., circa 1870. Extraordinary patina and condition. Copper and cast zinc with natural verdigris patina. One of the finest we have h

Plains Tacked Telescope and Case fourth quarter 19th century crafted from harness leather, with tacked strap   overall length 27-3/4 inches Joseph Henry Sharp painted a portrait of Bill Jones, a

kid leather body with bisque head and arms and wooden legs (knees to feet)in the original costume, 16 1/2" longthe head stamped "Bru Jne/6",the shoulder stamped "Bruwith Bru fabric label on the chestc

Attributed to J. Harris & Co., Boston, Massachusetts, appears in their illustrated catalogue from 1878, no. 13. Depicted with empty bow raised but arrow in opposing hand. At the time, the 30-inch mode

Large and impressive banner weathervane. Copper and cast zinc. Probably by Howard, Co. Bridgewater, Mass., circa 1875. Retains and outstanding natural verdigris patina, without restoration. First publ

Important Prancing Horse Weathervane, circa 1860, having molded and sheet copper body, on an iron support bar, simulating the ground. Beautiful original verdegris patina. We have found no other exampl

Rare lady riding side-saddle weathervane. Molded copper. American, circa 1900. Condition: Later 20th century restored gold surface. Cap for one hoof missing. L 28-1/4" H 26". Copy and paste link for h

Height including stand 42 inches, length 42 inches. Provenance: Sotheby's New York, December 8, 1984, lot 173.

Fine folk art Ewe weathervane. Attributed to Cushing and White. Molded copper with historic paint and gold leaf. L 21-1/2" H vane only 17" H w/base 27-3/4" W of base 3". Please refer to this link for

Large fine copper firehouse parade horn weathervane, the banner/flag initials "SVFD" (? Volunteer Fire Department) with weathered surface, green patina, mounted on a contemporary iron stand, circa 190

The wide, full bodied figure on four independent legs is constructed with a zinc head. No markings, some sources have attributed this model to Harris and Son, Boston. Measures 21.25 x 34 x 7.25 inches

Goat weathervane. Base included. 24" W., 23 1/2" Ht..

BRASS AND LEATHER 3 DRAW POCKET TELESCOPE, 16 1/2" OPEN, 6" CLOSED. THE OBJECTIVE AND EYE PIECE COVERS ARE COMPLETE. THE OPTICS ARE WORKING AND ARE IN GOOD ORIGINAL CONDITION. PROVENANCE: THIS IMPORTA

A.L. Jewel & Co., Waltham, Massachusetts, horse jumping through hoop weathervane. Stamped on right side of body. 28" L., 16" Ht., comes with stand.

The full bodied copper weathervane by Cushing and White is found with its exceptional original gilt finish largely intact. The portions not displaying the original surface are accented by naturally oc

By L.W. Cushing & Sons, Waltham, Massachusetts, ca. 1880. Full bodied copper ram with attached horns. Weathered with traces of gilding. Some surface enhancement to bottom rod. 28"h. 30"l. including ba

WEATHERVANE - Full-Bodied Realistic Bull in copper and zinc with remnants of gilding, attributed to Jones, on custom stand, roughly 18 1/2" x 25 1/2" x 6". Very good condition, wonderful, verdigris pa