FALK HORIZONTAL ENGINE

289. FALK HORIZONTAL ENGINE | 13" h. x 9" l. | Repainted with original stack. | $150 - $300

Original removable stack, nice partial red highlighting, has original burner in front. Made of brass and white metal. Has been used, but displays well. Condition: (Very Good). Dimensions: 16" x 15" x

J. Falk Horizontal German Steam Engine- Early 20th Century. Nice brass turn-of-the-century engine from Falk. Used relic missing accessories as shown.

Unmarked, probably Falk. Original red stack, has some accessories, nice pinstriping around base. Condition: (Very Good - Excellent). Dimensions: 15 - 1/8" x 13" x 17".

Includes original wooden box marked 1 only 4F steam engine, with label on one end. Original box is missing top sliding piece. Engine itself is horizontal with original red stack. Condition: (Excellent

2 Bing live steam engines. One Bing airmotor and one horizontal - Note tile floor which is extremely realistic. JF Falk air motor engine with dual flywheels.

c. 1910, single cylinder with medium flywheel, horizontal boiler, brass appointments, brick pattern smoke stack. . Includes pine crate and burner. Ex. Paul Hale Collection 12 1/2" l. x 10 1/2" w. x 15

Horizontal boiler, single flywheel and cylinder mounted atop green base. Includes pine crate and burner. Ex. Paul Hale Collection 13 1/2" l. x 12 1/2" w. x 19" h.

Horizontal burnished boiler, simulated brick fire box in black, with governor, large six spoke flywheel in red. Includes pine crate and burner. Ex. Paul Hale Collection 12 3/4" l. x 11" w. x 15" l.

Colorful pressed steel base pattern, single oscillating cylinder, full appointments on boiler, embossed stack. . Includes pine crate and burner Ex. Paul Hale Collection 10" l. x 10" w. x 14" h.

Kenton Toys Horizontal Engine with Crank in Cast Iron. Tought to find toy circa 1930. Wires move simulated valves and cranks. Wheel below governor seized. Light hairline crack at wheel base. Restored.

Unmarked electric horizontal engine like new, with cloth cord.

Bertoia BASICS Online: J F JOSEF FALK HORIZONTAL STEAM PLANT circa 1935 Base 10" x 9" x 14" h.

2 Single-Cylinder Water-Cooled Gasoline Engines Probably England, steel, cast iron and brass. 1) Horizontal engine, crosshead-guided piston rod to the crankshaft with two 3 3/4-inch flywheels, without

(lot of 3) Magic Lanterns by Georg Carette & Co.: (1) type 244, G.C. & Co. logo label at rear; (1) red body with logo label at rear; (1) Carette and J. Falk, horizontal cylindrical body on wood, for s

Lineshaft on green hand painted base with later Marklin, Made in Germany mark on bottom. Nice original Marklin horizontal engine with original stack. Larger vertical with Marklin plate and burner but

Steam powered, mounted on wooded gallery, metal and wood both show signs of age, engine has reverse gear, appears to function as it should, displays very well and has nice industrial look, likely from

Very nice early brass horizontal steam engine with wood base. Turns freely with little friction. Has not been tested. Displays very well with age appropriate wear. Measures approximately 16" across by

1028. KENTON HORIZONTAL STEAM ENGINE | Ex. Tony Annese Collection. | 8" l. | Some wear at edges of red frame, otherwise (Excellent Condition) | $700 - $1,000

Horizontal Steam Engine with Vertical Boiler, c. 1930 Soldered brass boiler, length 14 1/5 in., Ø 6 1/5 in., with manometer, steam whistle and safety valve, gas-heated, double-acting cylinder, sl

A MODEL UNDERTYPE STATIONARY HORIZONTAL STEAM ENGINE, ENGLISH, DATED 1894, with metal plaque engraved F. LAWRANCE 1894,the single cylinder with eccentric driven slide valve, the valve chest with maker

312. HORIZONTAL STEAM ENGINE W/ CAST BASE | German, single cylinder, slider, oilers, cast frame on solid brass base, weight - 32 lbs. | 14" l. | (Pristine to Near Mint Condition) | $600 - $900

Model of a Live-Steam Single-Cylinder Horizontal Mill Engine, c. 1900 Steel, brass and cast-iron, 3-inch double-action cylinder, crosshead guide in plane bearings, spoked 11-inch flywheel, on cast-iro

Model of a Live Steam Horizontal Mill Engine, c. 1900 Steel, brass and cast metal, 3-inch cylinder, crosshead guide in lateral bearings, sliding valve control with eccentric ring, crankshaft with 3 oi