Morse Model 15 Diving Helmet Lead Weights Front & Back

Newly cast pair of front and back lead weights for the Morse model 15 shallow water diving helmet. These weights are the correct size, weight and do have Front and Back clearly part of their design, j

These are the front and back lead weights for an AJ Morse or Morse Diving Equipment Model 15 shallow water diving helmet. These weights are contemporary. The pair weigh 34 pounds in total. Unused in l

This is a mold to make lead diving weights. This pattern is referred to as a horseshoe or chest weight. They were strapped to the diver via the helmet on the chest and back. This model, specifically,

Contemporary set of four weights that will fit the Miller Dunn Divinhood Style #1 and or #2. Each lead weight has the correct copper tab on back and Miller Dunn company information on the front. Each

Featured here is one of the most unique shallow water diving helmets ever made! This is a Model 15 helmet made by Morse Diving Equipment in Boston, MA. This was the only shallow water helmet Morse off

Featured here is one of the most unique shallow water diving helmets ever made! This is a Model 15 helmet made by Morse Diving Equipment in Boston, MA. This was the only shallow water helmet Morse off

This is a very nice original Morse Diving Equipment Model 15 air pump. This is the same put that would accompany the Model 15 shallow water diving helmet. The original two piece cast iron handle and b

One of the most interesting shallow water helmets ever designed is the Model 15 made by Morse. Unknown to many people is that Morse would sell these helmets to the A. Schraders Son company and allow t

Nice set of Miller Dunn lead weights for the Style 3 shallow water Divinhood helmet. These weights are contemporary. Front weight is 8.5 pounds, back weight is 18.5 pounds. Each is stamped with the co

Nice set of Miller Dunn lead weights for the Style 3 shallow water Divinhood helmet. These weights are contemporary. Front weight is 8.5 pounds, back weight is 18.5 pounds. Each is stamped with correc

Great looking set of Miller Dunn lead weights for the Style 3 shallow water Divinhood helmet. These weights are contemporary but have developed some age giving them a truly old appearance. Front weigh

This is a very nice pair of divers horseshoe or breast and back weights. There are no manufacturers stamped on the weights. Each lead weight weighs 33 pounds and is approximately 10 by 8 inches in siz

WWII era Morse Diving Equipment model 15 shallow water diving pump, serial 6902 with USN inspection stamp. Measures 21 inches wide, 29.5 inches tall with the handle. Should have a 2nd section of handl

This is a Morse commercial glass face plate with leather gasket in excellent condition. No damage to the threads, no chips or cracks in the glass, with retaining ring, both front turning knobs and pro

A. J. MORSE & SON DIVING HELMETAmerican (Boston), pre- World War II, serial # 2171. Face plate with both left and right side ports, with "Telephone Con" port top left to the front. Serial number and m

This is a complete set of four lead weights for a Miller Dunn Divinhood Style 1 or 2. Both models of helmets utilized a copper strip that allowed the weights to be hooked to them via a copper tab on t

A rare vintage solid brass casting of a four light, three bolt, Draeger helmet, with front and back weights rigged. Excellent half body detail and scale. The bust is set on a solid marble base and is

Excellent set of Russian divers lead weights. The set comes with a pair of ankle weights with straps and a set of front and back chest weights. The chest weights are 36 pounds each, the ankle weights

This is a complete set of four lead weights for a Miller Dunn Divinhood Style 1 or 2. Both models of helmets utilized a copper strip that allowed the weights to be hooked to them via a copper tab on t

This is a complete set of four lead weights for a Miller Dunn Divinhood Style 1 or 2. Both models of helmets utilized a copper strip that allowed the weights to be hooked to them via a copper tab on t

This is a complete set of four lead weights for a Miller Dunn Divinhood Style 1 or 2. Both models of helmets utilized a copper strip that allowed the weights to be hooked to them via a copper tab on t

Morse Mark V Diving Helmet Replica - A replica of the diving helmet used by the US Navy from 1916-1984. With plaque on front stating: "Morse Diving Inc. Mark V Mode I, Boston, Mass, USA". The "No." an

United States Navy Mark V diving helmet breastplate. Dated April 1944 this was made by Morse Diving Equipment Company in Boston, MA. During this time period Morse began using lead identification plate

Double sided trifold brochure printed in the late 1970s by Morse Diving Equipment. A later Morse sticker was placed on the front circa late 1990s. The piece is in excellent condition, with some age on